Dear Amrit,

Thanks for providing the article and helping us to learn the pneumatic designing for conveying systems.

The steps described in this article are very easy to understand and anybody having a basic knowledge of Excel can prepare his own calculation sheet.

Dear Amrit thanks again. ■

Dear Amrit,

Thanks for providing the article and helping us to learn the pneumatic designing for conveying systems.

The steps described in this article are very easy to understand and anybody having a basic knowledge of Excel can prepare his own calculation sheet.

Dear Amrit thanks again. ■

Could i have a copy of this article?.It is very important to me as i have to revised a pneumatic conveying line for Cement ■

Could i have a copy of this article?.It is very important to me as i have to revised a pneumatic conveying line for Cement ■

Dear Elijah.

Mr. Amrit's article is a powerful tool to everyone that is involved in the pneumatic conveyor bussiness. It is easy to follow. I do recomend it to you. ■

Dear Elijah.

Mr. Amrit's article is a powerful tool to everyone that is involved in the pneumatic conveyor bussiness. It is easy to follow. I do recomend it to you. ■

Dear elijah,

Beware of implementing revisions of a pneumatic cement conveying installation without thoroughly executed the right design calculations.

It takes a lot of studying, testing, mathematical research, knowledge of physics, verifying existing installations and experience, to create a reliable description of pneumatic conveying.

And even then surprises are not uncommon.

Redesigning an installation by using a calculation method, with which you are not familiar, will be a risk, not to be neglected.

Afterwards, you cannot blame the calculations.

Success

teus ■

Dear elijah,

Beware of implementing revisions of a pneumatic cement conveying installation without thoroughly executed the right design calculations.

It takes a lot of studying, testing, mathematical research, knowledge of physics, verifying existing installations and experience, to create a reliable description of pneumatic conveying.

And even then surprises are not uncommon.

Redesigning an installation by using a calculation method, with which you are not familiar, will be a risk, not to be neglected.

Afterwards, you cannot blame the calculations.

Success

teus ■

Hi Amrit!

I am very much interested to your article. Can you send me a copy of your literature.

Thank you very much.

regards,

Hamlet

■

Hi Amrit!

I am very much interested to your article. Can you send me a copy of your literature.

Thank you very much.

regards,

Hamlet

■

Amrit ji,

i am very much intertred in your article regarding theory of dilute phase pneumatic conveying systems can i get a copy of it.

thank you,

for Sandeep Dhiman ■

Amrit ji,

i am very much intertred in your article regarding theory of dilute phase pneumatic conveying systems can i get a copy of it.

thank you,

for Sandeep Dhiman ■

Dear Amrit,

Thank you very much for the article you sent me by mail,

it has provided a comprehensive set of info in order to check existing pneumatic lines as well as first design of new ones!

Thank you very much

Roberto Palazzolo

ENVIRO S.r.l.

Technical Manager

P.zza Rossetti 5

16129 Genova

ITALY ■

Dear Amrit,

Thank you very much for the article you sent me by mail,

it has provided a comprehensive set of info in order to check existing pneumatic lines as well as first design of new ones!

Thank you very much

Roberto Palazzolo

ENVIRO S.r.l.

Technical Manager

P.zza Rossetti 5

16129 Genova

ITALY ■

Dear Mr AGARWAL

Request please send me a copy of your reffered article

regards

M S PRABHUDESAI

E-MAIL ADDRESS mspd2003@rediffmail.com ■

Dear Mr AGARWAL

Request please send me a copy of your reffered article

regards

M S PRABHUDESAI

E-MAIL ADDRESS mspd2003@rediffmail.com ■

dear sir

I need some information and calculatingf technique for the afformentioned subject worked by you please send mea copy of the latest version of your work

Thanks alot

Morteza Ahangar

email: Ahaengar@yahoo.com ■

dear sir

I need some information and calculatingf technique for the afformentioned subject worked by you please send mea copy of the latest version of your work

Thanks alot

Morteza Ahangar

email: Ahaengar@yahoo.com ■

Thank you Mr Agarwal

After reading the copy of your article it I belive it will be helpful for me in the future.

Kind Regards

Roger Karlsson

■

Thank you Mr Agarwal

After reading the copy of your article it I belive it will be helpful for me in the future.

Kind Regards

Roger Karlsson

■

Mr Agarwal,

Thank you for the article. It will help my group gain a better understanding of pneumatic conveying systems and in development of specifications for such systems. The article was pretty clear and easy to follow with only a few hiccups when setting up the calculations. Thanks again! ■

Mr Agarwal,

Thank you for the article. It will help my group gain a better understanding of pneumatic conveying systems and in development of specifications for such systems. The article was pretty clear and easy to follow with only a few hiccups when setting up the calculations. Thanks again! ■

Dear Amrit

Could you send me a copy of this article?

My e-mail is cemkizildemir@hotmail.com

"... If you know basic Excel, you can use my calculation method published in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

Best regards

Cem Kizildemir

cemkizildemir@hotmail.com ■

Dear Amrit

Could you send me a copy of this article?

My e-mail is cemkizildemir@hotmail.com

"... If you know basic Excel, you can use my calculation method published in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

Best regards

Cem Kizildemir

cemkizildemir@hotmail.com ■

Hi

Please, can you send me a copy?

mcjman@hotmail.com

I appreciate it

THX ■

Hi

Please, can you send me a copy?

mcjman@hotmail.com

I appreciate it

THX ■

Hi

Please, can you send me a copy too?

Mohd-Rosli.Azman@my.lafarge.com

I appreciate it

THX ■

Hi

Please, can you send me a copy too?

Mohd-Rosli.Azman@my.lafarge.com

I appreciate it

THX ■

Dear Amrit,

Thank you for your immediate reply.

Could you send me a copy of this article?

My e-mail is hemant.apte@adityabirla.com

"... If you know basic Excel, you can use my calculation method published in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

Best regards

Hemant Apte ■

Dear Amrit,

Thank you for your immediate reply.

Could you send me a copy of this article?

My e-mail is hemant.apte@adityabirla.com

"... If you know basic Excel, you can use my calculation method published in Powder Handling and Processing magazine in its April 2005 issue. This article gives the theory and all of the equations that are internally used in computer programs. It takes the mystery out of the computer programs. I can send a free PDF copy if you need one...."

Best regards

Hemant Apte ■

Thank you Mr. Amrit

The article is well written and easy to understand, I'm on my way to perform the calculations in Excel. Thanks again. ■

Thank you Mr. Amrit

The article is well written and easy to understand, I'm on my way to perform the calculations in Excel. Thanks again. ■

Thank you Mr. Agarwal for sending me the article on "theory and design of dilute phase pneumatic conveying systems". I found it a practical. I will try to create my calculation sheets in Excel.

I definitely recommend the article as best for usage!

Regards,

Hemant Apte

INDIA ■

Thank you Mr. Agarwal for sending me the article on "theory and design of dilute phase pneumatic conveying systems". I found it a practical. I will try to create my calculation sheets in Excel.

I definitely recommend the article as best for usage!

Regards,

Hemant Apte

INDIA ■

Date: 6th. Oct. 2008

Dear Mr. Agarwal,

I thank you very much for sending me your article on "Theory and Design of dilute phase Pneumatic Conveying".

The presentation in spread-sheet format will make it extremely useful in designing systems.

I shall definitely contact you in case if any further technical consultation is required.

With best regards.

Ajaysingh ■

Date: 6th. Oct. 2008

Dear Mr. Agarwal,

I thank you very much for sending me your article on "Theory and Design of dilute phase Pneumatic Conveying".

The presentation in spread-sheet format will make it extremely useful in designing systems.

I shall definitely contact you in case if any further technical consultation is required.

With best regards.

Ajaysingh ■

Dear Amrit,

Would you please provide us the technical artical 'System design calculation for pnuematic conveying'.

We would also like to know more about information available with you regarding MS excel based program.

currently we are using self made excel programs for selection of various systems.

Please let us know about you and your services in detail for future communications.

Thanking you,

Warmly regards,

From,

Vikesh Patel

Exe. Engineer

Mobile: ++91 98250 40848.

AMAR FABRICATORS & ENGINEERS,

C1/B, 4305, Phase - IV, GIDC, Vatva, Ahmedabad - 382445.

GUJARAT, INDIA. Telefax: ++91 79 25840219.

Email: amarfabricators@yahoo.co.in,afe@live.in

Website: www.amarfabricators.co.in ■

Dear Amrit,

Would you please provide us the technical artical 'System design calculation for pnuematic conveying'.

We would also like to know more about information available with you regarding MS excel based program.

currently we are using self made excel programs for selection of various systems.

Please let us know about you and your services in detail for future communications.

Thanking you,

Warmly regards,

From,

Vikesh Patel

Exe. Engineer

Mobile: ++91 98250 40848.

AMAR FABRICATORS & ENGINEERS,

C1/B, 4305, Phase - IV, GIDC, Vatva, Ahmedabad - 382445.

GUJARAT, INDIA. Telefax: ++91 79 25840219.

Email: amarfabricators@yahoo.co.in,afe@live.in

Website: www.amarfabricators.co.in ■

Dear Mr Amrit

I am currently assigned to assess the newly installed pneumatic conveying system for PVC resin. May I request you to send me your highly rated article, which I am sure will be helpful for me to evaluate pressure drop and other parameters.

Best Regards

M. A. Ansari

Engro Polymer & Chemicals Limited

Karachi, Pakistan.

Phone :+92-21-4730173

Fax : +92-21-4730155

E-mail : mansari@engro.com ■

Dear Mr Amrit

I am currently assigned to assess the newly installed pneumatic conveying system for PVC resin. May I request you to send me your highly rated article, which I am sure will be helpful for me to evaluate pressure drop and other parameters.

Best Regards

M. A. Ansari

Engro Polymer & Chemicals Limited

Karachi, Pakistan.

Phone :+92-21-4730173

Fax : +92-21-4730155

E-mail : mansari@engro.com ■

Dear Amit,

I am some what new in this field, and would like to refer your spreadsheet.

I shall be grateful to receive it.

Waiting for your reply.

you can email to me at the following address justclick3@gmail.com

Originally Posted by Amrit Agarwal

My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.

Regards,

Amrit T. Agarwal

Consulting Engineer

Pneumatic Conveying Consulting Services

Email: polypcc@aol.com

Ph and Fax: 304 346 5125

■

Dear Amit,

I am some what new in this field, and would like to refer your spreadsheet.

I shall be grateful to receive it.

Waiting for your reply.

you can email to me at the following address justclick3@gmail.com

Originally Posted by Amrit Agarwal

My article "Theory and Design of Dilute Phase Pneumatic Conveying Systems" was published this month in Powder Handling and Processing magazine. This article gives an easy to use Excel-based calculation method for designing new dilute phase pneumatic conveying systems or for improving the performance of existing conveying systems.

Regards,

Amrit T. Agarwal

Consulting Engineer

Pneumatic Conveying Consulting Services

Email: polypcc@aol.com

Ph and Fax: 304 346 5125

■

Dear Amrit,

Thank you very much for your article.

I'm relatively new in this field and will use it to gain insights in the wonder of pneumatic conveying.

Kind regards,

Guus ■

Dear Amrit,

Thank you very much for your article.

I'm relatively new in this field and will use it to gain insights in the wonder of pneumatic conveying.

Kind regards,

Guus ■