Re: Vibratory Feeder Under Truck Discharge?
Yes, quarrymen often do it. ■
Ideal Grizzly Solution:
Here is a solution, a TITAN truck station discharge feeder with a grizzly discharge at the end, from JVI.
See the attached files in this post
or visit our website page:
href="http://www.jvivibratoryequipment.com/industriesmining.html" target="blank">http://www.jvivibratoryequipment.com...esmining.html
OR
href="http://www.jvivibratoryequipment.com/titanheavydutyfeeders.html" target="blank">
http://www.jvivibratoryequipment.com/titanheavydutyfeeders.html
We have videos of it too.
Attachments
■
Re: Vibratory Feeder Under Truck Discharge?
Thank you for the nice PDF files attached.
From your file , I read that
1) - No natural frequency tuning required
Could you please explain more.
2) - No exciter springs.
Do the vibrofeeder not require any spring? How the vibration shocks are absorbed?
Please reply.
Regards, ■
Grizzly Feeder
Dear Sir,
We supplied a number of vibratory Feeders last year to a Copper mine, configured in the way suggested.
If you would like more information please visit our website www.hewittrobins.co.uk or contact me directly on the number below.
Best
Chris Pratt
----------------------------------------------------------------------------------------
Hewitt Robins International Crushing and Screening Ltd,
Huntingdon Court, Huntingdon Way,
Measham, Swadlincote, Derbyshire, DE12 7NQ
Tel: 00 44 (0)1530 272799,
Fax:00 44 (0)1530 272787,
Web: www.hewittrobins.co.uk ■
Yes This Is Possible
check with GK......GENERAL KINEMATICS.......for specs.
GB ■
Re: Vibratory Feeder Under Truck Discharge?
As George mentioned General Kinematics would be able to build a piece of equipment to your specifications. Please let us know specifics such as tonnages as well as any other requirements you may have.
Best Regards,
Todd
www.generalkinematics.com ■
Grizzly Feeder
Yes you can do this.
WE have supplied several grizzly type feeders in the past for heavdy duty applications. These wre supplied under the "Locker" banner & are well known in the quarrying induatry as probably the best feeder on the market.
Please contact me with additional detail & we can quote.
Allan THompson
07788 105174
Rotex ■
Vibratory Feeder under Truck Discharge?
viratory grizzly feeder under trucks diccharge chute?
Hi dear friends
Could you please tell me if it is possible to use a vibratory feeder against direct discharge of material under a chute with grizzly?
Trucks discharge copper ore (sulfuric) which the stones under 450mm pass by a grizzly and discharge to an inclined apron feeder.
I want to know if it is possible to change the apron feeder with a 2 mass grizzly vibratory feeder?
The equipments are not installed yet and the project is on paper yet.
Best Regards ■