Trev
Yes, you can change the cutpoint with one simple Air Classifier to change the top cut from the specifications you remark. Aside from the inline Air Classifier, you will also need interconnnecting ductwork, a Dust Collector and Fanset for conveying the bulk feedstock through the unit.
Please feel free to contact me via email and I can provide you with a General Arrangement Drawing depicting the process flow along with a Proposal if you desire. ■
Is The Project Still Live
Hello Trev,
Just came across your post and am interested to know if the project is still live. We could supply air classifier that would produce required grades and with the flexibility of being able to change the cut point.
I look forward to your response.
E ■
Production Line for FGL
Hi all once again,
i was wondering what would be the most basic method of producing feed grade limestone form the following material:
3mm down limestone
moisture content 2% max
10 tph through put
i was hoping for a one simple dry classifier unit with a cut point sufficient to give me a two materials grading 3mm to .6mm and .6mm down two silo s for each product.
Would it be possible to change the cut point of the particular classifier if and when desired??
Thanks as always in anticipation for your valued views.
Regards,
trev ■