Posted by Marty Tomlinson, VP marketing on September 06, 2000 at 09:33:46:

In Reply to: Re: Manufacturers of eqpt/ Sources Required posted by Steve Smith on April 10, 2000 at 10:51:55:

Uni-Facs is a mid-west supplier of conveying systems including, but not limited to the following: Belt conveyors, apron flight conveyors, storage equip. bucket elevators and associated structures. ■

Posted by R.M.BHATIA on May 04, 2000 at 23:08:10:

In Reply to: Re: Manufacturers of eqpt/ Sources Required posted by Steve Smith on April 10, 2000 at 10:51:55:

Dear Sir / Madam ,

We are the largest fully integrated manufacturers of high quality flat steel products (HRC ) in the western region of India, having production capacity 2.4 Million tonnes per Annum and located at Hazira - 394 270, India. We are also enhancing our production capacity from 2.4 to 3.0 Million M.Ton in near future.

To cater to the need of raw materials to our HBI & HRC Unit and for export we intend to develop berthing facilities for unloading capsize vessels, about 5 Kms. distance from our plant.

I> QUANTUM OF CARGO TO BE HANDLED PER ANNUM

Our tentative handling for cargo movements per Annum would be as under :-

S.No. INWARD OUTWARD Total

1 Bulk Cargo- 8 MnT HRC 1.5 MnT

2 Scrap 0.5 MnT

Sub Total 8.5 MnT 1.5 MnT =10.0 MnT

II> BERTH FACILITIES

We would be constructing 2 berths at port to accommodate the following shipments / sizes.

A. For Bulk Cargo.

Ship size : 1,80,000 DWT

Length : 300 Mtrs.

Breadth : 50 Mtrs

Draft : 16 Mtrs

Cargo proposed to be handled:-

Lump Ores, Pellets, Coal, Lime stone

B.For Unit and General Cargo

Ship size : 75,000 DWT

Length : 225 Mtrs.

Breadth : 37 Mtrs.

Draft : 13.5 Mtrs.

Cargo proposed to be handled:-

HRC, Sheet Packs, Slabs & Scrap.

III> CARGO HANDLING EQUIPMENTS

A > SHIP UNLOADER :-

i) For Bulk Cargo

S.No. Description Specifcations

1 Nominal capacity 2000 TPH

2 Type Grab bucket - clamshell

3 Rail Span(Approx.) 35 mtrs.

4 Out reach(Apporx.) 40 mtrs. at seaside

15 mtrs. at landside

5 Lift(approx.) 50 mtrs. (approx.)

(21 mtrs. above rail ;

29 mtrs. below rail )

6 Lifting 40 / 50 T (approx.)

ii) For Unit & general Cargo

S.No. Description Specifcations

1 Nominal capacity 1000 TPH

2 Type Orange peel grab for scrap / c- hook /

sprader for HRC

3 Rail Span(Approx.) 30 mtrs.

4 Out reach(Apporx.) 35 mtrs. at seaside

15 mtrs. at landside

5 Lift(approx.) 50 mtrs. (approx.)

(21 mtrs. above rail ;

29 mtrs. below rail )

6 Lifting 40 / 50 T (approx.)

B> CONVEYORS :-

Suitable pipe conveyors for handling above cargo, capacity - 2000 TPH - 5 K.M. Long approx.

We would like to invite vendors :-

1> Who can supply us cargo handling equipments namely Ship unloaders - Capacity 2000 TPH for Bulk & 6000 TPD for unit cargo.

2> Consultants who can provide services to us for finalizing the layout, equipments selection & assist us in testing & commissioning of equipments.

3> We would prefer vendor who can provide us services on BOOT basis i.e. Built, Operate, Owned & Transfer.

4> Necessary electrical power will be made available at berth.

5> On the basis of equipments selection the berth width / rail span will be finalized.

6> The specifications stipulated for the above equipments are preliminary & tentative.

We would request you to forward us your company profile, product range & list of such equipments supplied to various ports, under operation. Please also send your budgetory offer indicating tentative delivery schedule by E-mail / Fax / courier.

Regards,

R.M.BHATIA

G.M - Material Handling,

ESSAR STEEL LTD,

27TH k.m. Surat Hazira road,

Hazira - 394 270.

DIST. SURAT. INDIA

Fax : +91 261 882908 / 882561

Phone : +91 261 882260 / 882290

E-Mail : bhatia@shipping.essar.co.in ■