Steel Silos
There are two fabricators namely M/S Neo Structo and M/s Plus Tech who have fabricated Steel Silos for us as per our design at Hazira.
P.C. Tarey ■
Re: Silo Manufacturer
check the website for info.http://www.surfindia.com/industrial-goods/ ■
Silo Manufacturer, India
We canassist you if you let us have information on matetial to be stored, capacity of silo, prefered extraction system, feeding system.
Silos are normally of size bigger than truck transportable size. These are to be fabricated at site. We can do conceptual design for a system suitable for your needs. Later we can do structural and foundation design which will enable you to get the silo made at site. Feed and extraction equipments will be bought out items. We can provide specification for these. ■
Steel Silo
Dear sir
We can design,Fabricate and erect silo as per your requirement.Silo can be manufactured at our works or at site as per requirement
Rajeev
modtech@modtechprojects .com ■
Silo Manufacturer
M/S.HAJEE A.P.BAVA& CO. (Engineering Contractors) are nearer to Ahemadabad.They have already done the below jobs at various places in INDIA.Their address is given below:-
ADDRESS :-
Kind AttN:- Mr.P.S.Nair.
M/S. HAJEE A.P.BAVA & Co.
171, Road No.5, Subhash Nagar,
UDAIPUR-313001 ( RAJASTHAN)
Phone No :- 0294-3090603,2413035, Fax :- 0294-2412740
(N. Keshav)
Sr. Manager Technical
Chaibasa Cement Works ■
Silo Manufacturer India
Dear Sirs,
With respect to message of Mr. DIPAK JAGANI, we write to submit that we do designing and manufacture of Silos in capacities from 50 tons to 500 tons capacity for pulverised materials like Fly-ash, Cement, Lime etc.
Apart from the silos, we also manufacture other types of equipments, as indicated in an enclosed letter.
We woulod be delighted to meet requirements of Mr. Jagani, and would request you to kindly ask him to furnish the Operational Requerements of the Silo, for our study and reply.
Regards
for NMF Equipments and Plants Pvt. Ltd.
A-146, Kalka Jee, New Delhi - 110 019
Phone. 011-26436639, 26221887
FAX 011026436639, 26430728 ■
Silo
Dear Mr. Deepak Jagtani,
We are the leading company in India manufacturing Plastics Ancillary Equipments mainly Bulk Conveying System under German Joint Venture.
We have a Indo German Joint Venture with 50% partnership for manufacturing Bulk Conveying Systems and we had supplied several silos & silo feeding system in India.
We have complete design, technology and experience for ready made systems but we do have silos only up to 50 Tons (100 cubic meters) size.
If your requirement can be fulfilled with this, we invite you to visit our Plant in Ahmedabad.
Dhruv Shah
M/s. Prasad Group of Companies
14-16, GIDC Industrial Estate,
Phase 1, Vatva, Ahmedabad- 38245.
Phone : 25830112/ 25890687 ■
Re: Silo Manufacturer
Thanks for reply,
We require this silo for Polycarbonate (PC) in powder as well as pellets forms, we would like to fabriate the silo for 400 KL (225 Ton) working capacity ( 7 meter dia x 12 meter shell height and 60 deg. con) - 02 number with SS304 contact part.
Please feel free to contact under sign for any further informaiton.
thanks & Regards,
Dipak Jagani
Maintenance Leader
GE Advanced Materials - Plastics
(Divn. of GE India Industrial Private Limited)
PO. Jawaharnagar- 391320, Dist. Vadodara, India.
D- +91-265-2233693
T +91-265-2232147, 2232177 (Extn.164 )
F +91-265-2232144, 2230334
dipak.jagani@ge.com
Visit us at : http://www.geplastics.com ■
Silo Manufacturer India
Dear Dipak JAGANI,
Referring to the enquiry for hopper/ silo, please email the following
information to assist you in the matter :
1) Each hopper storage capacity
2) Material being stored, its bulk density, size, specialty.
3) Your preference whether hopper of steel or RCC
4) Whether you need design-drawings or manufacturing including
design-drawings or only fabricator-erector who will manufacture according to
the drawings. Any of the services are possible (need not be from me only).
5) Method of feeding into hopper, and method of discharging from hopper.
I will suggest you course of action on knowing the above information. I have
been late in responding by 3 to 4 days due to preoccupation.
Regards,
Ishwar G Mulani.
Author of Book : Engineering Science and Application Design for Belt
Conveyors.
Author of Book : Belt Feeder Design and Hopper Bin Silo
Advisor / Consultant for Bulk Material Handling System & Issues.
Pune, India.
Tel.: 0091 (0)20 25882916 ■
Silo Manufacturer India
Dear Dipak JAGANI,
Referring to the enquiry for hopper/ silo, please email the following information to assist you in the matter :
1. Each hopper storage capacity
2. Material being stored, its bulk density, size, specialty.
3. Your preference whether hopper of steel or RCC
4. Whether you need design-drawings or manufacturing including design-drawings or only fabricator-erector who will manufacture according to the drawings. Any of the services are possible (need not be from me only).
5. Method of feeding into hopper, and method of discharging from hopper.
I will suggest you course of action on knowing the above information. I have been late in responding by 3 to 4 days due to preoccupation.
Regards,
Ishwar G Mulani.
Author of Book : Engineering Science and Application Design for Belt
Conveyors.
Author of Book : Belt Feeder Design and Hopper Bin Silo
Advisor / Consultant for Bulk Material Handling System & Issues.
Pune, India.
Tel.: 0091 (0)20 25882916 ■
Silo Fabricators In India
Dear sir,
We are able to manufacture of silo as per your requirement.
our workshop is located at india near Ahmedabad.
Friend's industry
158,G.I.D.C,Makarpura
Baroda
Gujarat
India
Ph-91-265-2651027
91-265-2649047
Fax-91-265-2651026
Eail:friendseport2005@indiatimes.com ■
Re: Silo Manufacturer, India
This is Envitec Biogas (India) Pvt.Ltd. (Joint venture of MPPL with Envitec Germany)
We glad to inform you ,your products are in shortlist in our GERMAN OFFICE.
We require a pipes& fittings for our first Biogas Project in Udupi.
.If you will make a price list we may offer soon
We required the following storage tanks for our first Biogas power plant .
1.PREPARATION TANK:
CAPACITY:2.5 M3;DIAMETER:1.5 mts;HEIGHT:1.5 mts MOC :GRP/HDPE/SS304;QTY:1 NO
2.MIXING TANK:
CAPACITY:10 M3;DIAMETER:2.5 mts;HORIZONTAL HEIGHT:4 mts MOC :GRP/HDPE/SS304.QTY:1 NO
3.RECIRCULATION TANK:
DIAMETER:0.8 mts;HEIGHT:6 mts MOC :GRP/HDPE/SS304.
QTY:2 NOS.
Pls receive this details &send the price list to us as soon.(Because this requirement is most urgent)
Note: If we feel a best in the quality we will offer Above requirements x 6 times.
Regards,
Moorthi,Deepa&Navaneethan,
Project Dept. ■
Re: Re: Silo Manufacturer, India
Dear Mr. Dipak Jagani.
We , (Energo Engineering Projects Ltd.) are the leading supliers of Ash & Material handling systems.
We have a strong history of 20 yrs with the manufacturing experience of over 100 MS Silos of capacities upto 1500 Tonnes
Kindly send us the detailed enquiry.
Regards
Sachin kr. arora
ENERGO ENGINEERING PROJECTS LTD.
TEL: +911126385323/28/29/38
Fax: +911126385333
Email; energo@energo.co.in
energo@del3.vsnl.net.in
Web: www.energoindia.com ■
Introduction Letter.
Dear Sirs / Mam,
This is M/S. Sahyadri Steel & Alloys. We are so much happy to introduce ourself. We are Stockist / Manufacturer & Supplier of: Sainless Steel, Carbon Steel, Alloy Steel Tubes, Pipes, Pipe Fittings, Fanges, Sheets, Coils, Plates etc...... In short we are dealing in all kind of ferrous & non ferrous materials.
We wish to start long time business relation with your esteemed organisation. So we request you that kindly find herewith our attached company profile & send us your valued purchase requirements so as enable us to quote our most compititive rates.
We hope so you will do the needfull...............
Have a nice day..................
CHEERS & REGARDS,
NAGESH MAHADIK. (PARTNER.)
MOB: 092220 66574.
For,
M/S. SAHYADRI STEEL & ALLOYS.
MUMBAI.
Tel: 022 6743 8391. Fax: 022 6610 4694.
MAIL ID: sahyadristeel@hotmail.com
------------------------------------------------
Attachments
sahyadri steel - introduction letter. (DOC)
■
Re:
Could you accept a manufacturer from China? it is very professional. if you can, please tell us your contact way. ■
Is Our Location Is Suitable To Your Need Or Not?
Dear Mr. Dipak Jagani.
We , Shri Shiv Shakti Engineering Located at Bhuj near to Ahmadabad (320 km) so if you think that our location is suitable for your need than reply me in our corporate ID info@ssengkutch.com
we are a conveying systems manufacturer and also heavy fabricator.
so, Kindly send us the detailed inquiry.
Regards
Mahesh Maradiya (B.E. Mechanical)
GM of Shri Shiv Shakti Engineering
Mob : 09428684024
Email; info@ssengkutch.com ■
Silo manufacturer
I'm looking urgently for steel silo manufacturers close to Ahmedabad, India.
Does anyone know a manufacturer. ■