STAFFORDSHIRE, UK—A new Centri-Sifter centrifugal screener model MO-SS from Kason Corporation features a hinged end cover and three-bearing shaft that cantilevers for quick removal of internal components.
External roller bearings are located at the motor end of the shaft and on a hinged cover at the discharge end for maximum support and vibration-free operation. When the end cover is hinged open, the shaft becomes a cantilever supported by a third externally-mounted roller bearing located between the motor-end bearing and material feed point, allowing internal components to slide freely from the opposite shaft end for thorough wash-down.
The screener is constructed of stainless steel finished to industrial, food, dairy and pharmaceutical standards, as well as general chemical applications involving frequent screen changes/inspections or runs of multiple materials with no cross contamination.
Dry or moist bulk solid material is gravity-fed into the feed inlet and redirected into the cylindrical sifting chamber by means of a feed screw. Rotating helical paddles within the chamber continuously propel the material against the screen, while the resultant, centrifugal force on the particles accelerates them through the apertures. On-size particles are funneled through a discharge housing equipped with an inspection door, while oversized particles and trash are propelled through the screen cylinder and ejected through a discharge spout.
In addition to sifting and scalping of dry bulk materials, the screener can break up soft agglomerates and/or dewater moist solids or slurries.
The company also manufacture centrifugal screeners with two-bearing cantilevered shafts and non-cantilevered shafts, as well as circular vibratory screeners, bag dump screeners, static sieves, and circular fluid bed dryers, coolers and moisturisers.
Kason Centri-Sifter model MO-SS features a three-bearing cantilevered shaft, allowing internal components to slide freely from the shaft end for cleaning, screen changes or inspection.
Kason Centrifugal Screener
QUICK-CLEAN CENTRIFUGAL SCREENER
HAS CANTILEVERED SHAFT
STAFFORDSHIRE, UK—A new Centri-Sifter centrifugal screener model MO-SS from Kason Corporation features a hinged end cover and three-bearing shaft that cantilevers for quick removal of internal components.
External roller bearings are located at the motor end of the shaft and on a hinged cover at the discharge end for maximum support and vibration-free operation. When the end cover is hinged open, the shaft becomes a cantilever supported by a third externally-mounted roller bearing located between the motor-end bearing and material feed point, allowing internal components to slide freely from the opposite shaft end for thorough wash-down.
The screener is constructed of stainless steel finished to industrial, food, dairy and pharmaceutical standards, as well as general chemical applications involving frequent screen changes/inspections or runs of multiple materials with no cross contamination.
Dry or moist bulk solid material is gravity-fed into the feed inlet and redirected into the cylindrical sifting chamber by means of a feed screw. Rotating helical paddles within the chamber continuously propel the material against the screen, while the resultant, centrifugal force on the particles accelerates them through the apertures. On-size particles are funneled through a discharge housing equipped with an inspection door, while oversized particles and trash are propelled through the screen cylinder and ejected through a discharge spout.
In addition to sifting and scalping of dry bulk materials, the screener can break up soft agglomerates and/or dewater moist solids or slurries.
The company also manufacture centrifugal screeners with two-bearing cantilevered shafts and non-cantilevered shafts, as well as circular vibratory screeners, bag dump screeners, static sieves, and circular fluid bed dryers, coolers and moisturisers.
For more information, please visit:
https://edir.bulk-online.com/profile...ion-europe.htm
https://edir.bulk-online.com/profile/8929-kason.htm
http://www.google.com/search?client=...UTF-8&oe=UTF-8
Photo:
Kason Centri-Sifter model MO-SS features a three-bearing cantilevered shaft, allowing internal components to slide freely from the shaft end for cleaning, screen changes or inspection.
Attachments
kason (JPG)
■