J-Tec Material Handling: Solids & Liquids Handling
General video of a fictional food processing installation
Description
In almost every installation raw materials (powders or liquids) may be intended for immediate use, but could also be stored in silos or other intermediate facilities before being called for production.
Whenever the materials are being called for production, they can be transported mechanically or pneumatically. J-Tec9095 j tec material handling.htm is an expert in means of pneumatic conveying as they master pressure and vacuum conveying techniques applied in continuous or discontinuous systems, overpressure systems and so on.
When it comes to discharging applications J-Tec is known for its high quality, ergonomic and dustfree bag discharging stations, allowing their customers to dose small amounts of products in their process flow.
If elements such as accuracy, consistent recipes and repeatability are important, they are able to integrate continuous and discontinuous dosing and weighing process solutions.
Continuous quality control during your complete process flow is advised in order to meet your predefined requirements. Therefore, J-Tec often integrates several control points such as sieving installations and metal detection systems.
J-Tec disposes of an impressive reference list when it comes to implementing extruders in their process solutions in as well the chemical as the food industries. These particular setups are highly suitable for the creation of new composite products.
J-Tec’s in-house liquid engineers are experts in dissolving, mixing and dosing liquids into powder process installations. Simulations of processes such as vacuum mixing, inline mixing and dosing but also pneumatic conveying, dry blending and many other process steps can all be executed in their test facilities.
J-Tec focusses on continuous improvement of its process concepts resulting in highly efficient installations and succeeding in being one step ahead of its competitors.
Being innovative often means being creative. Whenever the available space for a process installation is limited, out of the box thinking might be necessary. J-Tec knows how to tackle these circumstances and will always think one step ahead. In the given situation they will for instance work with altitude and engineer vertical blending installations instead of using pneumatic conveying lines for transporting your materials.
J-Tec’s many years of experience allows them to create own applications which perfectly comply with the market demands. Their innovative pinching systems, Fibc’s clamps, hygienic valves, vibrating tables and ergonomic and dustfree bag discharging units are among the world’s top quality products.
J-Tec employees are experts in implementing fully automated dosing and weighing systems guaranteeing exact amounts of products being collected. Often these systems are equipped with J-Tec’s own accurate dosing valves.
Homogeneous mixtures can be achieved by applying different mixing solutions. Depending on the industry and the product being handled, J-Tec will find the most suitable solution.
Whenever the mixture is achieved J-Tec foresees several controlling units to guarantee a clean finished product before packaging.
Keywords
bulk truck unloading applications, bag discharging, BigBag discharging, loss in weight feeders, extruding, a fluid bed, Blending, mixing, bag filling , buffer hopper, dosing valve, sieving
J-Tec Material Handling Video: Solids & Liquids Handling
J-Tec Material Handling: Solids & Liquids Handling
General video of a fictional food processing installation
Description
In almost every installation raw materials (powders or liquids) may be intended for immediate use, but could also be stored in silos or other intermediate facilities before being called for production.
Whenever the materials are being called for production, they can be transported mechanically or pneumatically. J-Tec9095 j tec material handling.htm is an expert in means of pneumatic conveying as they master pressure and vacuum conveying techniques applied in continuous or discontinuous systems, overpressure systems and so on.
When it comes to discharging applications J-Tec is known for its high quality, ergonomic and dustfree bag discharging stations, allowing their customers to dose small amounts of products in their process flow.
If elements such as accuracy, consistent recipes and repeatability are important, they are able to integrate continuous and discontinuous dosing and weighing process solutions.
Continuous quality control during your complete process flow is advised in order to meet your predefined requirements. Therefore, J-Tec often integrates several control points such as sieving installations and metal detection systems.
J-Tec disposes of an impressive reference list when it comes to implementing extruders in their process solutions in as well the chemical as the food industries. These particular setups are highly suitable for the creation of new composite products.
J-Tec’s in-house liquid engineers are experts in dissolving, mixing and dosing liquids into powder process installations. Simulations of processes such as vacuum mixing, inline mixing and dosing but also pneumatic conveying, dry blending and many other process steps can all be executed in their test facilities.
J-Tec focusses on continuous improvement of its process concepts resulting in highly efficient installations and succeeding in being one step ahead of its competitors.
Being innovative often means being creative. Whenever the available space for a process installation is limited, out of the box thinking might be necessary. J-Tec knows how to tackle these circumstances and will always think one step ahead. In the given situation they will for instance work with altitude and engineer vertical blending installations instead of using pneumatic conveying lines for transporting your materials.
J-Tec’s many years of experience allows them to create own applications which perfectly comply with the market demands. Their innovative pinching systems, Fibc’s clamps, hygienic valves, vibrating tables and ergonomic and dustfree bag discharging units are among the world’s top quality products.
J-Tec employees are experts in implementing fully automated dosing and weighing systems guaranteeing exact amounts of products being collected. Often these systems are equipped with J-Tec’s own accurate dosing valves.
Homogeneous mixtures can be achieved by applying different mixing solutions. Depending on the industry and the product being handled, J-Tec will find the most suitable solution.
Whenever the mixture is achieved J-Tec foresees several controlling units to guarantee a clean finished product before packaging.
Keywords
bulk truck unloading applications, bag discharging, BigBag discharging, loss in weight feeders, extruding, a fluid bed, Blending, mixing, bag filling , buffer hopper, dosing valve, sieving
(click on picture to expand)
Click here to see the Videowatch?v=iH4TqYENuXU
More information on J-Tec Material Handling9095 j tec material handling.htm
Google Search - Websearch?q=j tec+material+handling+site%3Abulk online.com
Google Search - Imagessearch?q=j tec+material+handling+site:bulk online.com&client=firefox a&hs=tVT&rls=org.mozilla:de:official&channel=sb&source=lnms&tbm=isch
J-Tec Material Handling on the Portalsearch?q=J Tec+Material+Handling ■