Ibau Bearing Type
Farid,
I suggest you ask IBAU direct - mraemmele@ibauhamburg.de
R.H. Wohlbier ■
Re: Ibau Pump Bearings
Thanks for your reply.
I sent email to IBAU direct, but no reply till now.
If any one know the bearings type only, kindly tell us.
B.R.
Farid ■
Re: Ibau Pump Bearings
Dear Farid,
Dismantle the pump and read on the side of the bearings the make and the type of the bearing.
Go to the nearest bearing supplier and buy the same type (of a known manufacturer) and reassemble the machine.
If you cannot have the pump out of service for a too long time, then you should have had a spare pump on stock. Ask IBAU for a quotation for (2) pumps and I am sure they will respond.
A bearing cannot be a problem for an experienced maintenance engineer. A new screw would take some more time.
And, you should have more spares in your workshop.
Success
Teus ■
Teus
Re: Ibau Pump Bearings
Dear Mr. Teus,
Thank you for your advice.
The problem is that, the pump is very old and the maintenance team mounted tapered bearing, and we have a problem in the bearings, and I want to be sure from the bearings type before replacement.
Also I found on the internet O&M manual for the pump, wrote that the bearings type are cylindrical bearing and roller bearing. ■
Re: Ibau Pump Bearings
AST Bearings is easily capable of supplying or engineering to meet specific liquid pump demands. ■
IBAU Pump Bearings
Hello,
We have an IBAU pump type V in an cement plant. Could you please help us to know the recommended bearing type in this equipment?
Best regards
Farid ■