This standard rules the define,type,modal,method for installing, technical requirement, experimental method,inspection method,inspection gulation,Marker,package,shipment,storage of Cartridge Type Dust Collector
This standard is adapt to the design and build of cartridge type dust collectors using air filter cartridge using filter material of Celloluse,Cellulose/Polyester blended Polyester+Menbrane air filter cartridge.
This Standard is not adapt toexplosion-proof type.
2Definition
Below the standard uses defines
2.1 Membrane Filter Media
In filter material surface to paste the duplicate pore membrane to enhance certain performance index the filter material.
2.2 Filter Media Used for Cartridge
After the special handling processing, has the close pore structure also the quality of material toughs it out, can make the multi-pleat circular filter drum, also has certain performance index
filter material.
2.3 Air Filter Cartridge
By the filter cartridge took the filtering element composes the multi-pleats, the circular, the tube shape, match by in the metal or the chemical material support the core filtering element.
2.4 Cartridge Type Dust Collector
By the filter cartridge took the filtering element composes or uses the pulse injection the dust remover.
2.5 Induction The Spray Nozzle
Has many times induction performance, increases the injection quantity, causes when the filter drum clear ash injection pressure, air current even cloth in filter drum endophragm spray nozzle.
2.6 Steel Consumption Quantity
The dust remover main body quality (enters, between discharge flange, arranges above ash mouth flange part, not including support and heat insulating layer, but including must want technological ladder platform equipment quality) and ratio of the filtration area.
2.7 Membrane Fastness
The fastness the membrane adheres to the filter media, indicated by Mpa.
2.8 Burst
Paper or cardboard in unit area along with increases evenly the most tremendous pressure, indicated by Mpa.
2.9 Deflection
Under the standard condition, the curving end clamp stipulation filter paper test specimen to 15° the angle time strength or the moment of force, indicated by mN or mN.m.
2.10 Filter Paper Total Thickness
Filter paper total thickness = filter paper thickness + corrugated thickness
2.11 Corrugated Tthickness
The corrugated shape filter paper corrugated ripple depth, indicated by mm.
2.12 Volatility
Under the stipulation condition, the material which on the filter paper can volatilize (for example
solvent and water and so on) quality, by % expression.
2.13 Resin Content
On the filter paper includes the resin quality, by % expression
3 Iinstallation of Air Filter Cartridge
3.1 the requirement of filter cartridge installation
3.1.1 Vertical installment
3.1.2Filter drum size series and specification
3.2 Filter drum size series and specification
5. inspection rule
5.1 Membrane filter media, filter cartridge and dust collector used in cartridge dust collector must be inspected qualified by manufacturing plant and enclosed with inspection qualified certificate.
5.2 All dust collector parts must be inspected qualified ,and the outsoucing must have qualified certificate.
5.3 Membrane filter media used in filter cartridge,filter cartridge and dust collector examination includes exwork inspection and form inspection.
5.4 Membrane filter media used in filter cartridge’s inspection item according to table15
5.5 Exwork examination
5.5.1 The membrane and filter cartridge used in the cartridge dust collector should be inspected according to table 15,16,15 seperately when exwork inspection
5.5.2 According to other specification examination in ordering agreement stipulation
5.8 Form examination
5.8.1 If there is one of the conditions,membrane filter media and filter cartridge used in cartridge dust collector should have form examination.
5.8.1.1 When Producing for the first time or trial product design finalization
5.8.1.2 When the The stereotypia product structure, the manufacture craft, the material have change greatly, possibly affects the product performance
5.8.1.3 When lot production
5.8.2 The form inspection of Membrane filter media,cartridge and dust collector’s form Cartridge dust collector should be carried on according to table15,16and 15 stipulation.
5.8.3 Form check sample sampling, should extract through in the exwork examination quality products. Each kind of membrana tectoria filter material to extract the test specimen to carry on the pattern examination together every year. each kind of filter drum with the different membrana tectoria to extract one to carry on the form examination every year; The dust remover extracts one every year or in experimenting
scene to extract one to carry on the form examination.
5.8.4 form inspection criterior
5.8.4.1 If in the extraction sample examination project or two basic terms are unqualified, then determines this product is unqualified.
5.8.4.2 If the sample is unqualified, then extracts two to carry on the examination again, if still had one itemt to be unqualified, then determined this batch of products was the defective works, two
samples only then determined completely as the quality products.
6Marker,Package,Shipment,Storage
6.1 Dust collector need nameplate at the evident place Details:
6.1.1 Name of Vendor and Brand
6.1.2 Type of Production
6.1.3 Operation Standard Number
6.1.4 Main Technical DataAir FlowFilter Area,etc.
6.1.5 Net Weight kg
6.1.6 Overall Dimension(LengthWidthHeightmm
6.1.7 Come Out Date and Serial Number
6.2. Package for dust collector should according to the demand for truck shipment,vessal shipment.
6.3 The mark on the package should be clear and regular.Details
6.3.1 Name and Address of Manufacturer
6.3.2 Product type and name
6.3.3 Consignee name and address
6.3.4 Carton number
6.3.5 DiameterLengthWidthHeightmm1-/total
6.3.6 Total weight kg
6.3.7 The package for filter cartridge and electrical equipment should be marked as Damp-proofpressure guard
6.3.8 Any other necessary label
6.4 The lable and words need the Black ink to wright in order not to be obscurity after a long timeEach packeage need labels at least three sides Bulk cargo in the package need a label. For the bulk dust collector or components need the labels material as water-resistsun-proof, hard to defluvium paints.
6.5 The instruction manualcertificationPacking List and other technique documents together with dust collectors need to packed in a plastic bagand fixed on the dust collectorMark“Random Files Here”
6.6 Dust collectors and the elements should be stocked at the ventilation-well and
non-corrosive aeriform warehouse separately and regularly.
No squeezing, prevention corrosiondeformation and lost.
7Length of Warranty
On condition of the user operate according to operating specification.
Date from the filter material,filter cartridge and dust collector arrive to the place nominated by the consignee. If breakdown or cannot operate smoothly within 12 months.The supplier should replace or repair for free. If supplier and consignee has own agreement.They can execution just according to the agreement no lower than this standard.
PRC Standards for Dust Collectors
National Standard of Dust Collector in China
■
Standard for Cartridge Type Dust Collector
www.rhfilter.com Dust collector manufacturer
1. Range
This standard rules the define,type,modal,method for installing, technical requirement, experimental method,inspection method,inspection gulation,Marker,package,shipment,storage of Cartridge Type Dust Collector
This standard is adapt to the design and build of cartridge type dust collectors using air filter cartridge using filter material of Celloluse,Cellulose/Polyester blended Polyester+Menbrane air filter cartridge.
This Standard is not adapt toexplosion-proof type.
2Definition
Below the standard uses defines
2.1 Membrane Filter Media
In filter material surface to paste the duplicate pore membrane to enhance certain performance index the filter material.
2.2 Filter Media Used for Cartridge
After the special handling processing, has the close pore structure also the quality of material toughs it out, can make the multi-pleat circular filter drum, also has certain performance index
filter material.
2.3 Air Filter Cartridge
By the filter cartridge took the filtering element composes the multi-pleats, the circular, the tube shape, match by in the metal or the chemical material support the core filtering element.
2.4 Cartridge Type Dust Collector
By the filter cartridge took the filtering element composes or uses the pulse injection the dust remover.
2.5 Induction The Spray Nozzle
Has many times induction performance, increases the injection quantity, causes when the filter drum clear ash injection pressure, air current even cloth in filter drum endophragm spray nozzle.
2.6 Steel Consumption Quantity
The dust remover main body quality (enters, between discharge flange, arranges above ash mouth flange part, not including support and heat insulating layer, but including must want technological ladder platform equipment quality) and ratio of the filtration area.
2.7 Membrane Fastness
The fastness the membrane adheres to the filter media, indicated by Mpa.
2.8 Burst
Paper or cardboard in unit area along with increases evenly the most tremendous pressure, indicated by Mpa.
2.9 Deflection
Under the standard condition, the curving end clamp stipulation filter paper test specimen to 15° the angle time strength or the moment of force, indicated by mN or mN.m.
2.10 Filter Paper Total Thickness
Filter paper total thickness = filter paper thickness + corrugated thickness
2.11 Corrugated Tthickness
The corrugated shape filter paper corrugated ripple depth, indicated by mm.
2.12 Volatility
Under the stipulation condition, the material which on the filter paper can volatilize (for example
solvent and water and so on) quality, by % expression.
2.13 Resin Content
On the filter paper includes the resin quality, by % expression
3 Iinstallation of Air Filter Cartridge
3.1 the requirement of filter cartridge installation
3.1.1 Vertical installment
3.1.2Filter drum size series and specification
3.2 Filter drum size series and specification
5. inspection rule
5.1 Membrane filter media, filter cartridge and dust collector used in cartridge dust collector must be inspected qualified by manufacturing plant and enclosed with inspection qualified certificate.
5.2 All dust collector parts must be inspected qualified ,and the outsoucing must have qualified certificate.
5.3 Membrane filter media used in filter cartridge,filter cartridge and dust collector examination includes exwork inspection and form inspection.
5.4 Membrane filter media used in filter cartridge’s inspection item according to table15
5.5 Exwork examination
5.5.1 The membrane and filter cartridge used in the cartridge dust collector should be inspected according to table 15,16,15 seperately when exwork inspection
5.5.2 According to other specification examination in ordering agreement stipulation
5.8 Form examination
5.8.1 If there is one of the conditions,membrane filter media and filter cartridge used in cartridge dust collector should have form examination.
5.8.1.1 When Producing for the first time or trial product design finalization
5.8.1.2 When the The stereotypia product structure, the manufacture craft, the material have change greatly, possibly affects the product performance
5.8.1.3 When lot production
5.8.2 The form inspection of Membrane filter media,cartridge and dust collector’s form Cartridge dust collector should be carried on according to table15,16and 15 stipulation.
5.8.3 Form check sample sampling, should extract through in the exwork examination quality products. Each kind of membrana tectoria filter material to extract the test specimen to carry on the pattern examination together every year. each kind of filter drum with the different membrana tectoria to extract one to carry on the form examination every year; The dust remover extracts one every year or in experimenting
scene to extract one to carry on the form examination.
5.8.4 form inspection criterior
5.8.4.1 If in the extraction sample examination project or two basic terms are unqualified, then determines this product is unqualified.
5.8.4.2 If the sample is unqualified, then extracts two to carry on the examination again, if still had one itemt to be unqualified, then determined this batch of products was the defective works, two
samples only then determined completely as the quality products.
6Marker,Package,Shipment,Storage
6.1 Dust collector need nameplate at the evident place Details:
6.1.1 Name of Vendor and Brand
6.1.2 Type of Production
6.1.3 Operation Standard Number
6.1.4 Main Technical DataAir FlowFilter Area,etc.
6.1.5 Net Weight kg
6.1.6 Overall Dimension(LengthWidthHeightmm
6.1.7 Come Out Date and Serial Number
6.2. Package for dust collector should according to the demand for truck shipment,vessal shipment.
6.3 The mark on the package should be clear and regular.Details
6.3.1 Name and Address of Manufacturer
6.3.2 Product type and name
6.3.3 Consignee name and address
6.3.4 Carton number
6.3.5 DiameterLengthWidthHeightmm1-/total
6.3.6 Total weight kg
6.3.7 The package for filter cartridge and electrical equipment should be marked as Damp-proofpressure guard
6.3.8 Any other necessary label
6.4 The lable and words need the Black ink to wright in order not to be obscurity after a long timeEach packeage need labels at least three sides Bulk cargo in the package need a label. For the bulk dust collector or components need the labels material as water-resistsun-proof, hard to defluvium paints.
6.5 The instruction manualcertificationPacking List and other technique documents together with dust collectors need to packed in a plastic bagand fixed on the dust collectorMark“Random Files Here”
6.6 Dust collectors and the elements should be stocked at the ventilation-well and
non-corrosive aeriform warehouse separately and regularly.
No squeezing, prevention corrosiondeformation and lost.
7Length of Warranty
On condition of the user operate according to operating specification.
Date from the filter material,filter cartridge and dust collector arrive to the place nominated by the consignee. If breakdown or cannot operate smoothly within 12 months.The supplier should replace or repair for free. If supplier and consignee has own agreement.They can execution just according to the agreement no lower than this standard.