Dear Sir,

we are looking for company who wants to do his manufacturing work in india and looking for mass production with quantity and quality. If any company intersted in outsourcing work like belt conveyor manufacturing, silos manufacturing, or any material handling equipments... than mail us on info@ssengkutch.com ■

Originally Posted by Tushar Sarkar

Looking for coloborators/Associates for Biding of Ash Handling Package Units-2x500 MW

We are a fast growing Engineering concern based in India since 1994, mainly engaged in execution of Turn Key projects in Pneumatic conveying system, Ash Handling System, Intake water screening equipments. The company covers wide range of proven spectrum of activities from concept to commissioning - planning, monitoring, detailed engineering design, manufacturing, supply, installation, erection, testing & commissioning of the project, executed more than two hundred & fifty installations and have an impeccable reputation in Indian market.

We are inviting an overseas company having expertise in ash handling system for participate joint bidding as an associate for design , engineering, procurement, supply, erection, testing and commissioning of Total Ash Handling Plant Package of 2X500 MW Power Plant. The package Comprising of Bottom ash, economizer ash and fly ash handling system ( both dry and wet mode), Ash slurry disposal system, Ash Pond water recovery & recirculation system etc.

Please email us expressing your interest.

tushar.sarkar @mecgale.com

Dear Sir,

We appreciate that you took time from your busy day to take attention to this message, please view this mail in .Please allow us to introduce ourselves, we are N R D Industries. We are the distributor of KALMATRON®, a SUPER CONCRETE ADDITIVE that we believe has no equal in the United States or world-wide. Below is a brief description of products, and also enclosed is more literature for the same.

Kalmatron® Corporation has been established by the owners of patents, technologies, and trademark of Kalmatron® products. Kalmatron® Corporation is the manufacturer and supplier of its products for the building industry on the world market by appointed agencies and companies.

The Kalmatron® concept was discovered by Dr. Alex V. Rusinoff in 1982. First production began in 1992. The Kalmatron® theory created different mechanisms of cement grain decay, which gives numerous technologies for repair and building of new structures with highest performance of durability.

We ensure you to provide the best services and technical back-up to your applications. Please contact us at nrdindustries@gmail.com,

nrdindustries@gmx.com for more information regarding the information mentioned above or enclosed within. Thanking you in advance for your time and hoping to hear from you soon.

Sincerely,

Mr. Dilip Shah

N R D Industries

14 Whittlesey Avenue

West Orange. NJ 07052.

USA

Cell No: 1-848-391-1248

E-mail : nrdindustries@gmx.com, nrdindusties@gmail.com, KalmatronWorld@aol.com

Dr. Alex Rusinoff Tel No: 415 385 3290

websites:

www.kalmatron.com

www.shieldcrete.com

www.concreteadmix.com

www.concreterepair.name

www.wineryrepair.com

www.blockdegree.com

www.seismicstar.com

www.kalmatron.cn

KF-ASH

INCINERATED INDUSTRIAL WASTE UTILIZATION TECHNOLOGY

KALMATRON® KF-ASH is an additive to concrete mix containing over 50% of fly ash, slag ash or crumbled slag from the weight of cement. In order to utilize incinerated industrial waste (IIW) with maximum benefits, that concrete can be successfully used for conventional structures and is widely recommended for urban infrastructure.

KALMATRON® KF-ASH provides maximum of cementitious value to concrete mix and prevents leaching of unstable phases from IIW encapsulated or dissolved in concrete matrix to environment. It increases the field of IIW utilization for chemically, biologically or radioactively contaminated products.

Below is an example of concrete mix design and recommendations for batch preparation.

RECOMMENDATIONS FOR BATCH PREPARATION

Dry ingredients of the Cementitious Batch should be loaded into the mixer and mixed for 10 minutes.

Pour shown amount of water and mix for 5 minutes to get homogenous slur.

Load dry ingredients of the Aggregate Batch into the mixer and mix for 10 minutes.

Stiffness of mix may occur since the natural moistness of ash and aggregates is unknown. In this case, the amount of water should be increased by 10 to 18 Liters per cubic meter of concrete mix. Pour water gradually, 2 Liters every 1 minute, while the mixer is rotating, until the mix turns into a heavy slurry, but not of a watery-looking consistency.

The lower and upper limits of the water to cement ratio are shown in Table 1.

Do not apply any other additives, chemicals or supplementary materials.

Minimal trial or production volume is 0.1 m3, wherein all ingredients from table 1 must be divided by "10". The time of technological cycles must be the same as for a concrete mix of 1 m3.

RECOMMENDATIONS FOR APPLICATION

The mineralogical content of any inorganic incinerated product is locally recognizable data. It makes it necessary to find the best "water-to-cement" ratio for every kilning or incinerating facility, which supplies your concrete plant, for instance, with fly ash. Evaluation of compressive strength on the 14th day gives reliable data for comparative test results.

Batch #1 is designed for up to 40 MPa centrally loaded structural elements with approved resistance to compressive strength. For concrete structures exposed to high humidity, soil, liquids and any cycling conditions the isolation/insulation should be applied in accordance with standard technologies.

Batch #2 is designed for up to 25 MPa centrally loaded structural elements, or not permanently loaded structural or unified elements such as the wall's and separator's panels, pavement slabs, wall blocks, decorations, etc. For concrete structures exposed to high humidity, soil, liquids and/or any cycling conditions the isolation/insulation should be applied in accordance with standard technologies.

SPECIAL APPLICATIONS

If the product of incineration contains micro metal elements, heavy metal particles, metal oxides in any phase at 5% or more, then performance of KALMATRON® KF-ASH might be considered as providing the features of High Performance Concrete (HPC) to the Batch #1 and Batch #2.

Encapsulation of micro metal elements and particles is provided by their partial or complete oxidation into solutions of KALMATRON® KF-ASH with given high chemical potential under the water to cement ratio of 0.42.The petrography of that concrete may even exceed the modern standards of structural concrete or HPC.

In this case the testimonial procedure should be referred to the special concretes dedicated to particularly heavy-duty applications.

http://www.concreteadmix.com/documen...pplication.pdf ■

Dear Sir,

Since we have gone through your below details and interested to contact you for further more details informations kindly forward us your company product and company profile along with list of client, so that we can able to take forward for further our interest in mass production with quantity and quality. Anticipating your reply in this regards. e-mail: marwinengineeringcompanyltd@gmail.com.

Originally Posted by sseworks

Dear Sir,

we are looking for company who wants to do his manufacturing work in india and looking for mass production with quantity and quality. If any company intersted in outsourcing work like belt conveyor manufacturing, silos manufacturing, or any material handling equipments... than mail us on info@ssengkutch.com

■