
Weigh Feeder Specifications
Dear Atul Hingnekar,
we kindly ask you to contact
Mr Harish Ghai
Managing Director
Weighload Technologies Pvt. Limited
805, Sankalp III,
Opp. Classic Comfort Restaurant,
Film City Road,
Malad (East), Mumbai - 400097
India
Tel : +91-22-28429981
Fax : +91-22-28415342
Mob : +91-9324236399
*
Website : www.weighload.in
in this matter.
Best regards,
Håkan Lagergren
www.s-e-g.com ■
Cement Weigh Feeder
The most important thing to remember when handling cement is move slow. Many times a rotary prefeeder is required because cement aeriates so easily it will flood right through the feeder and weigh system is useless. My preference is to not enclose the bottom of the feeder to simplify any clean up, although some people like to add a drag conveyor for constant cleaning. ■
Re: Weigh Feeder Specifications
I am making specs for "Weigh Feeder" required in cement plant.
I would like to know what are the key features to be covered in this specs. And what are the design criteria for designing the weigh feeder.
Thanks
Atul
atliboy@gmail.com
Dear Mr Atul,
The specs are as follows;
1. Buffer Hopper - Sizing
2. Rotary Airlock Valve - Sizing
3. Weigh Hopper - Sizing
4. Bulk density - Material
5. Butterfly valve / Knife Gate Valve.
Total weight - Weigh Hopper, Material to weigh and batch and Butterfly Valve/ KGY
5. Load Cells - requires (nos) and mounting type.
Any queries kindly contact
9822798756
Regards,
Shaikh Hifzurrahman ■
Weigh Feeder Specification
I am making specs for "Weigh Feeder" required in cement plant.
I would like to know what are the key features to be covered in this specs. And what are the design criteria for designing the weigh feeder.
Thanks
Atul
atliboy@gmail.com
Dear Mr. Atul,
In brief I can give you , which are given below.
1. Material to be handled & it physical property.
2.Capacity ,tph
3. Weighing range
4.Belt width, length, belt speed to be defined.
5.Location i.e located below bunkers/bins
6.Type of weigh feeder, Volumertic....
7. Electrical power available.
8. Small write-up on Contorl system.
7. Type of Tach-meter.
9. Type of load cell & its protection class.
10.Type of electronic, like..INTECON/MICROCONT etc..
11. Number of machine idlers to be used.
12. Accuracy of the weighing system
Regards.
A.Banerjee ■
Weigh Feeder Specifications
Hi,
I am making specs for "Weigh Feeder" required in cement plant.
I would like to know what are the key features to be covered in this specs. And what are the design criteria for designing the weigh feeder.
Thanks
Atul
atliboy@gmail.com ■