Pipeline Design In Pneumatic Conveying
Dear Mr Agarwal.
I would like to get a copy of you article "RULES OF THUMB FOR PNEUMATIC CONVEYING PIPELINES"
E-mail : oussama.ob@gmail.com
Best regards ■
Re: Pipeline Design In Pneumatic Conveying
Dear, Amrit Agawal;
I guess this post is the reply of my post.
Did you read my e-mail for my request and questions?
Your paper was helpful to me. However, I cannot calculate because of subtracted correlation factor derived from experiment data.
And the system I want to calculate is dense phase. I also didn't take your reply about the availabilty to calculate dense phase via your method.
Have a great happy day. ■
Re: Pipeline Design In Pneumatic Conveying
I guess this post is the reply of my post.
Did you read my e-mail for my request and questions?
Your paper was helpful to me. However, I cannot calculate because of subtracted correlation factor derived from experiment data.
And the system I want to calculate is dense phase. I also didn't take your reply about the availabilty to calculate dense phase via your method.
Have a great happy day.
=============================================================================
Dear Shin,
This article is for dilute phase only. My dense phase article has not been published yet. Thanks for your interest.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting ■
Re: Pipeline Design In Pneumatic Conveying
Dear Amrit Agarwal;
Thank you for your reply.
I anticipate your article for dense phase.
If you publish your new paper, please notice me.
Have a great day. ■
Re: Pipeline Design In Pneumatic Conveying
Sir
Please provide me acopy of your document to ubiswas@yahoo.com
Regards
Unmesh Biswas ■
Request For Pdf Literature
Kind request to forward it to ubiswas@yahoo.com or ubiswas@indorama.com.ng
Regards
Unmesh Biswas
Deputy Manager - Technical Services and Projects
Indorama Eleme Petrochemicals Limited
Eleme, Port Harcourt, Rivers State, Nigeria ■
Re: Pipeline Design In Pneumatic Conveying
Amrit Agarwal
Pneumatic Conveying Consulting
polypcc@aol.com
Dear sir
Kindly forward me the article for the same
I have done the mail correspondence also with you
Regards
RAHUL CHAUBEY
mail id :- chaubey.07@gmail.com ■
Dear Sir
Kindly forward the article to my mail ID kartikraja21@gmail.com
Regards
karthik ■
Design Of Pipeline In Pneumatic Conveying
Dear Karthic,
Please send your request for this article to my email address given below. After receiving this article, you may then post any questions you have in this thread.
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
email: polypcc@aol.com ■
Your Article For Design Pipiline Of Pneumatic Conveying System
Dear mr. Amit agarwal,
i will request to kindly send your article for design pipiline of pneumatic conveying system, i
will be grateful if you can send on pramod86@sify.com,
it will be helpful for me, as i am a little novice at this front.
Awaiting your sheet
regards
pramod kumar jha
design an dproject co-ordination head.
Envior international corporation,
138, sector-4, vaishalli,
ghaziabad. Up, india ■
Re: Pipeline Design In Pneumatic Conveying
Dear Mr. Amrit Agarwal,
I would be very grateful if you could send me your article "RULES OF THUMB FOR PNEUMATIC CONVEYING PIPELINES"
Thank you so much.
Best Regards,
AGubert
andreugubert@gmail.com ■
Copy Of Article
Mr. Agarwal.
I would like a copy of your article RULES OF THUMB FOR PNEUMATIC CONVEYING PIPELINES.
Please send to jose.quintal@cemex.com
Kind Regards
Amrit Agarwal
Pneumatic Conveying Consulting
polypcc@aol.com
■
Thanks Mr. Agarwal
Amrit Agarwal
Pneumatic Conveying Consulting
polypcc@aol.com
Thank you Mr. Agarwal for sending me the file. It helped me so much.
With the best regards.
Md. Abu Zahid
abu.zahid.ipe.buet@gmail.com ■
Re: Pipeline Design In Pneumatic Conveying
Dear Forum Users,
I encountered a problem recently (a theoretical one). When I was calculating a pipeline I discovered that neither the bulk density, or the particle density seem to have an effect on the minimum fluid velocity required. I am fairly sure, that I made a mistake somewhere along my calculations, but I am simply not able to find the problem.
Could you please help me? Any suggestions would be appreciated.
Thank you in advance. ■
Re: Pipeline Design In Pneumatic Conveying
Agarwal, Amrit
thank you for sharing your article. but i have question about the How can i decide which pipeline is suite for my home or the underground fitting. Tell me the cost of the fitting charge and pipeline per meter charge. ■
Re: Pipeline Design In Pneumatic Conveying
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Seely,
Your question is not clear to me. Is this conveying system pipeline in your home?
Regards,
Amrit Agarwal
Pneumatic Conveying Consulting ■
Re: Pipeline Design In Pneumatic Conveying
Please provide me a copy of your document to gr8mechguru@gmail.com
Regards
Gurpratap Singh ■
Re: Pipeline Design In Pneumatic Conveying
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Dear Mr. Gurpratap Singh,
Please clarify the name of the document that you need. I will try to send it to you.
Regards,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com ■
Re: Pipeline Design In Pneumatic Conveying
Dear Mr. Gurpratap Singh,
Please clarify the name of the document that you need. I will try to send it to you.
Regards,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Dear Mr. Amrit Agarwal,
I am working in Ash handling palnt (O&M). here we have combine Vacuum & Pressure pneumatic conveying system.
I would be very grateful if you could send me your article "RULES OF THUMB FOR PNEUMATIC CONVEYING PIPELINES" & “Theory and Design of Dilute Phase Pneumatic Conveying Systems”
.
Thank you so much.
Best Regards,
Gurpratap Singh
gr8mechguru@gmail.com ■
Re: Pipeline Design In Pneumatic Conveying
Hello Sir,
Kindly forward the article to my mail ID amanahmeddahi@hotmail.com
Thanks & Regards,
Aman Ullah Dahi ■
Pipeline Design in Pneumatic Conveying
Correct design, route, and configuration of the conveying pipeline are critical for successful and trouble-free operation of a conveying system. This subject is fully covered in my article "RULES OF THUMB FOR PNEUMATIC CONVEYING PIPELINES" published by Chemical Engineering magazine in its May 2012 issue. You may like to get a copy of this article. Regards,
Amrit Agarwal
Pneumatic Conveying Consulting
polypcc@aol.com ■