Gcc Plant Supply
Yes this could be organised !
What the time frame to setup !
Equipment supply takes time !
What you would need is a good consultant to take charge !
rgds ■
Re: Gcc Production
Contact us through below Email ID:
cimmuk@gmail.com
Regards,
Bill ■
Superfine Powders
The best company to give you complete project is Alpine Hosakawa(hope spelling is right).
Best wishes,
Mizun ■
Re: Gcc Production
Hi friends,
Thanks for the responses so far.
We ourselves are the consultants for this Project to set up a GCC and PCC plant for our client. As consultants, the role of my firm ( http://www.chemiprocess.com) has been to conceptualise the plant, prepare the BEP ( Basic Engineering Package) comprising of process Flow Diagrams, mass balance diagrams, break-even analysis, profitability analysis,etc. This is all through and the Project is now going to be implemented, rather my clients are going to put in money. As consultants , it is the responsibility of my firm to source the equipment and machinery at the right cost, and take the client through till implementation.
Though our Feasibility Report talks about the enire Project comprising of two lines of dry ground GCC, one line of beneficiated GCC and one line of PCC, the client is going to invest money in stages, starting with the Primary crushing and Secondary crushing at the mine site, followed by Tertiary crushing at the factory, and then coarse milling and fine milling.
I am now looking for a company who can :
a) set up the PCC plant as a whole.
b) set up the GCC plant complete with beneficiation technology to produce GCC having whiteness and brightness over 95% +.
c) For dry GCC plant I am in touch with IVA and Eicher. Any other company?
Thanks, ■
Gcc And Pcc
Hello Amitava,
My name is Mark Toman and I work for Classifier Milling Systems. You can view us online at classifiermillingsystems.com for more information. However, briefly we are a size reduction and grinding technology company. We manufacture process equipment with many years of experience in the size reduction industry. At CMS we strive to earn our customer’s trust by supplying high quality equipment.
Our products are designed for reliable performance, easy maintenance, and energy efficiency. We have patented technology to most efficiently grind down particles to a uniform consistency, as well as reduce the amount of waste produced from the process. Whether it is offering a new system, designing additions to your existing operation, or simply supplying you with quality spare parts on time, we are looking to improve your company’s production, and profitability. At CMS we are committed to implementing and maintaining the highest standards of quality to ensure customer satisfaction.
We have expanded across the globe with projects in China and Brazil, among other places, ranging from the resource extraction industry to pharmaceuticals. Beyond the basic idea of grinding efficiency, we have also developed emission control technology with the capability of reducing excreted emissions to a fraction of your current levels.
I recently saw your post on the forum and thought that due to our expertise in the calcium carbonate industry specifically, we could help improve your company’s efficiency and costs, while also increasing production levels and therefore, profit margin. We are currently in negotiations with several large CaCO3 mining firms, and have effectively advised them on the best and most efficient ways to, both mine and grind their calcium carbonate, to the highest quality level of uniformly ground powder. Please feel free to email me back and let me know if you may be interested. I look forward to discussing the capability of supplying your company with our equipment and service. Your time and consideration is greatly appreciated.
Best,
Mark Toman ■
Gcc Production
Hello Mark,
Thanks for your introduction.
I will mail you the enquiry for the Material Flow Diagram which we have prepared on the GCC production. Preparation of the enquiry document will take a couple of weeks.
Meanwhile, please mail me your email id so that I can send you the enquiry outside the Forum.
My email id: chempro@blr.vsnl.net.in
Bye, ■
Re: Gcc Production
Yes , we can take responsibility for the entire line from infeed to finished products.
My company has many similar plants running in blue chip mineral companies.
Please email me at richard.woosnam@gmail.com as I am travelling and I will contact you to discuss. ■
Re: Gcc Production
Hi
Please write to me if you think I could help you from china.
Regards
Shankar Rajput
chinaplantview@yahoo.com ■
Re: Gcc Production
Originally posted by Amitava Banerji
We are helping a Client in setting up a Plant to produce GCC and PCC. There will be two lines of GCC , viz. 10 TPH and 20 TPH and a PCC of capacity 5 TPH.
Starting material : 750 mm size blocks of limestone and end product for GCC has to be of size d50 : 5 to 7 microns.
Have conceptualised the plant to start with Primary Crusher( Jaw) to crush from 750 mm to <100 mm and a Secondary Crusher ( Cone) to crush from <100 mm to < 24 mm, in the mine . At the factory we propose to start with a Tertiary Crusher ( VSI) to crush from < 24 mm to < 6 mm, Coarse Mill ( Ball Mill) to reduce the size from < 6 mm to < 2mm. Finally we plan to have a Table Roller Mill to mill from < 2 mm to d50 = 5 to 7 microns.
Can there be a single company who can take the responsibility to set up the entire line? There does not sem to be any company who can supply equipment right from Jaw Crusher to Table Roller mill.
The Project site happens to be Saudi Arabia.
Thanks,
DearSir,
If you need import grinding media from China.Please contact me .We can give you a best price.
Best Regards
Simon Chen
Anhui Ningguo ChengXi Wear-Resistant Material Co.,Ltd
Tel:+86-(0)563-3239655
Fax:+86-(0)563-4110211
Web: www.ahchengxi.com
Email:ahchengxi@126.com
MSN:qingchun888@hotmail.com ■
Offer
Dear Mr Amitava Banerji
We in FLSMIDTH provide a complete solution for cement industry. Adding to my above statement, I would really appreciate for your kindness to be more specific about your requirement .
We can provide you the concious coverage of your requirenment
Looking for your furthur take-on this matter
Thnx in anticipation
Cheers
Rahul Chubey
FLSMIDTH-CHENNAI
09381484995
04447481283 ■
Saudi Arabia
Can we have the project details, We are based in Saudi arabia for the last 40+ years involved in electromechanical works for goverment & private sector. Kindly visit our web www.mscl-marser.com for more of our activities
Regards
Fazil Syed.
Marine Services Co., Ltd
6th floor, Bahmeriz Center,
PO Box 5971 - Jeddah 21432
Kingdom of Saudi Arabia
Tel: +9662 648 2146
Fax: +9662 648 2145
Cell: +966 506 953 964
Email: Fazil@mscl-marser.com
Web: www.mscl-marser.com
Working: Saturday –Thursday
Local Time: GMT +300hrs
QUOTE=Amitava Banerji;45680]We are helping a Client in setting up a Plant to produce GCC and PCC. There will be two lines of GCC , viz. 10 TPH and 20 TPH and a PCC of capacity 5 TPH.
Starting material : 750 mm size blocks of limestone and end product for GCC has to be of size d50 : 5 to 7 microns.
Have conceptualised the plant to start with Primary Crusher( Jaw) to crush from 750 mm to <100 mm and a Secondary Crusher ( Cone) to crush from <100 mm to < 24 mm, in the mine . At the factory we propose to start with a Tertiary Crusher ( VSI) to crush from < 24 mm to < 6 mm, Coarse Mill ( Ball Mill) to reduce the size from < 6 mm to < 2mm. Finally we plan to have a Table Roller Mill to mill from < 2 mm to d50 = 5 to 7 microns.
Can there be a single company who can take the responsibility to set up the entire line? There does not sem to be any company who can supply equipment right from Jaw Crusher to Table Roller mill.
The Project site happens to be Saudi Arabia.
Thanks,[/QUOTE] ■
We May Help You To Set Up The Crushing Plant
Dear Sir,
Good day for you! we are the professional manufacturer in crusher and grinder machine.our products main include jaw crusher,cone crusher,impact crusher,vsi crusher,mobile crushing plant,stone crushing plant,mill,grinding mill,etc. I know you want to set up a stone crushing plant,I have known your requirement to the products,if you interest in our products,you may visit: http://www.zenithcrusher.com and leave your email, we may sent our product detail to you. and then if you buy our product,we may ask our erector to help you to set up the crushing plant that you need.I'm looking forward to your reply,
Thank you!
Best Regard
cassidy ■
Re: Gcc Production
DEAR AMITAVA bANERJEE
Greeting with salutation.
Kindly send me the enquiry on below doc to have a close coverage of supply. Well from side we do EPC work with the fullflage engg facility.
Send it to rahul.chaubey@flsmidth.com
Rahul ■
Hi
Dear Amitava ji,
Kindly send us Flow-sheets and Technical Specification for submitting our offer,
we are fulfill your requirements as per your time schedule.
E-mail id : hemtechnologies@gmail.com
Best Regards,
Sanjay Joshi ■
Gcc Production
Have you contact Metso Minerals www.metsominerals.com?
They make the Jaw Crushers and Ball Mills used for Ground Calcium Carbonate
I work for Sturtevant Inc. and we make the Air Classifiers that remove the low micron product from the ball mill discharge. The oversize is then sent back to the ball mill for regrinding. The air classifiers are shown on www.sturtevantinc.com ■
Re: Gcc Production
what is the PCC ? ■
Gcc Procssing Equipment
Originally Posted by Amitava Banerji
Starting material : 750 mm size blocks of limestone and end product for GCC has to be of size d50 : 5 to 7 microns.
Have conceptualised the plant to start with Primary Crusher( Jaw) to crush from 750 mm to <100 mm and a Secondary Crusher ( Cone) to crush from <100 mm to < 24 mm, in the mine . At the factory we propose to start with a Tertiary Crusher ( VSI) to crush from < 24 mm to < 6 mm, Coarse Mill ( Ball Mill) to reduce the size from < 6 mm to < 2mm. Finally we plan to have a Table Roller Mill to mill from < 2 mm to d50 = 5 to 7 microns.
Can there be a single company who can take the responsibility to set up the entire line? There does not sem to be any company who can supply equipment right from Jaw Crusher to Table Roller mill.
The Project site happens to be Saudi Arabia..
Thanks,
Hi,
Our company is expertised in developing GCC processing equipment,and we can offer you proper crusher to crush from 700mm to less than 45 micron of dry powder ,and then to wet grind dry powder of less than 45 micron into slurry of < 2 mm to d50 = 5 to 7 microns.At last ,we dry the slurry if your final product is the form of powder.We have mine,dry powder plant and GCC plant in China.
If you are willing to have cooperation with us,please send us email and let us know the specifications of your final product so that we can offer you an feasible report,plan of setting up GCC plant ,process cost and budget.
Thanks
Ericliu
Email:ericliu0128261@hotmail.com ■
Weeds Starting Again.
The plant should be half way built by now. Knock it on the head.
■
Re: Gcc Production
We are a Chinese local private company which is expertised in developing GCC wet-grinders and processing GCC slurry of all grades from filler to C65,C90,C95,C97,C98,C99.Our wet-grinder has a volume of 5000 litres.Two wet-grinders connected in series can have an output of about 10 dry tones per hour when processing filler(solids:68%).Three wet grinders connected in series can have an output of about 8 dry tones per hour when processing C65(solids:77%),and about 4.5 dry tones per hour when processing C95(solids:77%).We can offer you the whole processing system including slurry preparation,grinding,and screening.Our grinder is nearly the same as Wet-grinder from imerys, only that the price is greatly lower,and so it has a good cost efficiency.
For processing Filler, KWT/DT:65
For processing C95,KWT/DT:190-----Solids:77%
As for B'ness ,which is decided by brightness of the dry powder,and the grinding system nearly doesn't affect brightness of the final product.
If you are interested in our machines and equipments,pls contact us by email.
Best regards
Eric Liu
Email: ericliu0128261@hotmail.com ■
Flow Sheet
Is there any basic flowsheet for the plant which you are planning to build up?
Please let me know specifications, capacities, exc..
We may quote for you...
Regards
Baris Calisir ■
Flow Sheet
Is there any basic flowsheet for the plant which you are planning to build up?
Please let me know specifications, capacities, exc..
We may quote for you...
Regards
Baris Calisir
barisc@varlikmakina.com.tr
www.varlikmakina.com.tr
phone: +90 212 798 26 26
fax : +90 212 798 26 29
mobile: +90 541 413 86 32 ■
Re: Gcc Production
Originally Posted by baris calisirPlease let me know specifications, capacities, exc..
We may quote for you...
Regards
Baris Calisir
barisc@varlikmakina.com.tr
www.varlikmakina.com
Tel : +90 212 798 26 26
Fax : +90 212 798 26 29
Gsm: +90 541 413 86 32
check this : https://forum.bulk-online.com/showthread.php?t=17929 ■
Gcc Plant
Dear Sir,
If you still need info concerning your project, we are glad to help you.
NEUMAN-ESSER GmbH is manufacturing grinding and classifying systems according the latest technology.
We have many patents in our systems.
We recommand using Pendulum Mills new technology, with lower maintenance costs, high productivity, etc.
We can help you with the total project.
You can send an email to jackie.meul@neuman-esser.de
Please check our website www.neuman-esser.de
Thank you,
Jackie Meul
Sales Manager
NEUMAN & ESSER GmbH
Mahl- und Sichtsysteme
Grinding and Classifying Systems
Werkstrasse
52531 Uebach-Palenberg
Germany ■
GCC Production
We are helping a Client in setting up a Plant to produce GCC and PCC. There will be two lines of GCC , viz. 10 TPH and 20 TPH and a PCC of capacity 5 TPH.
Starting material : 750 mm size blocks of limestone and end product for GCC has to be of size d50 : 5 to 7 microns.
Have conceptualised the plant to start with Primary Crusher( Jaw) to crush from 750 mm to <100 mm and a Secondary Crusher ( Cone) to crush from <100 mm to < 24 mm, in the mine . At the factory we propose to start with a Tertiary Crusher ( VSI) to crush from < 24 mm to < 6 mm, Coarse Mill ( Ball Mill) to reduce the size from < 6 mm to < 2mm. Finally we plan to have a Table Roller Mill to mill from < 2 mm to d50 = 5 to 7 microns.
Can there be a single company who can take the responsibility to set up the entire line? There does not sem to be any company who can supply equipment right from Jaw Crusher to Table Roller mill.
The Project site happens to be Saudi Arabia.
Thanks, ■