Originally Posted by N. Ahmed

I need Detergent Slurry Spray pump with discharge pressure to 70 to 75 Bars with Capacity 4 yo 5 Cu.M/Hr. Complete with drive.

Help is needed for offer or name of Pump manufacturer who can quote for this application.

Regards

M. N. Ahmed

Unico Syndicate

1/11 Arakay Square - First Floor

Shahrah-e-Liaquat, New Challi

Karachi-74000, Pakistan.

Tele: 2423266, 2429526

Fax: 92-21-2416078. E-mail: unico.syndicate@attglobal.net

Em(P): mumtaznadeem.ahmed@attglobal.net

Tobee® TH Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling highly abrasive,high density slurries.

SPECIFICATIONS:

Size: 1" to 22"

Capacity: 3.6-5400 m3/h

Head: 6-125 m

Handing solids: 0-130mm

Concentration: 0%-70%

Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.

Design Features:

• Horizontal,Cantilevered,Centrifugal,Single stage slurry pump design.

• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.

• Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.

• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer

• Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

• Shaft seal - Packing seal,Centrifugal seal,Mechanical seal;

• Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc.

• The discharge branch can be oriented to any eight positions at the interval of 45 degrees;

• Easy to install and maintain in on-site application.

http://www.tobeepump.com/slurry-pumps/ ■