Breaking New Ground.
The animation is a brave introduction.
Unfortunately it does not show the toggle mechanism & the swinging jaw occasionally impinges on the backplate.
But least the rocks seem quite realistic. Few of your competitors illustrations are quite so ambitious.
Persevere. A frighteningly good example of what can be acheived in animating mineral process equipment is the one for mill reliners on the Russell website.
( www.rmeAus.com ) Go there & salivate!
I was well impressed: even if the round link chain was not quite fully continuous in the version I saw. It's still very, very good & makes a lot of other, almost all other, mineral process equipment sales efforts resemble a stone age club. Club in any sense of the word! ■
Jaw Crushers
The main reason:
1.The lubricating grease is insufficient
2.The lubricating grease is dirty and corrupt
3.The bearing is damaged
The trouble shooting:
1.Add lubricating grease
2.Change the lubricating grease after washing the bearing
3.Change the bearing
Our website:http://www.mineral-grinder.com
==========================================================
To add to the above:
A primary crushers operation depends on many things.
"First and Foremost In My Opinion"
The quality and type of the bearings used in any case
being either oil with a pressurized system
or grease lubricated.
The corner welds of the entire chamber
Is there an apron feeder in front of the jaw crusher?
1. The "Mohs or Rockwell Hardness" of the mineral crushed.
2. The desired production capacity of the primary crusher.
a. Unexploded Blasting Caps, either fuse type or electric
3. The amount of fines in the Run Of Mine (ROM) ore.
4. The hardness of the active and passive plates which affects the liner life. ■
That Is What I Need
that is what i need jaw crusher you provide???? ■
Re: Temperature Of Jaw Crusher Bearing
It was her way of free advertising for her company. I removed the link from her post. The words "jaw crusher" was linked to her website in China.
It is a very sneaky way of advertising. ■
Gary Blenkhorn
President - Bulk Handlng Technology Inc.
Email: garyblenkhorn@gmail.com
Linkedin Profile: http://www.linkedin.com/in/gary-blenkhorn-6286954b
Offering Conveyor Design Services, Conveyor Transfer Design Services and SolidWorks Design Services for equipment layouts.
Temperature of Jaw Crusher Bearing
Why the temperature of jaw crusher bearing is too high?
The main reason:
1.The lubricating grease is insufficient
2.The lubricating grease is dirty and corrupt
3.The bearing is damaged
The trouble shooting:
1.Add lubricating grease
2.Change the lubricating grease after washing the bearing
3.Change the bearing
Our website:http://www.mineral-grinder.com ■