Dust Collection Design
Hi lehoang,
See http://www.cospire.com Engineering Tips > Bulk Solids > Dust Control.
Regards - John.Rz ■
Untitled
.
Dear sir,
I am not found the link for dust collection system ?
Can you send it to me ?
krishnamoorthy
krishnaworks@hotmail.com ■
Re: Bag Filter Design
I've never found anything that John refers to on www.cospire.com ■
Bag Filter Design
Don' try to re-invent the wheel. The subect is too complicated for basic instruction in this forum.
Contact a few bagfilter manufacturers and describe your problem.
Michael Reid. ■
Re: Bag Filter Design
Hoang,
I represent baghouse.com, we can make custom filters and also provide installation and service.
Please shoot me an email at yousufnabi@hotmail.com with your exact specifications. ■
Untitled
Mr Hoang,
It is too long to explain for your questions and it is complex as well.
Please read the book " Filter dust collectors - Design and applications by Miles L Croom, McgrawHill Publications". Hope you will get enough clarity.
D.Rajasekhar ■
Re: Bag Filter Design
Hi All,
I am new member and kindly if there are any calculations or design corelations of design the bag filter:
* the air volume of the system( how it estimated)
* the filter area required by the filter unit( how can choose it)
* the size of the fan Set
* the velocity of the air suction
* the negative pressure estimation
* the shap limitations
and please inform me any data about air slide and it's applications and when , why it used.
i will be very thanks if any one can help me with this ASAP.
swapnil ■
Bag Filter Design
This is a subject too complex to address in a few words. Refer to the previous replies to this thread.
Michael Reid. ■
Bag Filter Design
Hi every body
I am new member as well, I am envolve with bag filter system field and high appreciate if some one would send me some guidance to calculate or design the bag filter:
Here below is my concern:
* the air volume of the system( how it estimated)
* the filter area required by the filter unit( how can choose it)
* the size of the fan Set
* the velocity of the air suction
* the negative pressure estimation
* the shap limitations
Many thank in advance and look forward to receive some support from you soon. ■