Worldwide advance in knowledge - underpinned scientifically.
The problem: When bulk material is transported on conveyor belt systems, the fines of bulk material stick to the returning belt due to adhesive properties at the discharge point. This leads to piles of material in the plant, which not only mean additional work for the operator, but also additional costs.
The solution: Since the foundation of the company in 1975, HOSCH has mainly been concerned with the development, production and sales of highly efficient conveyor belt cleaning systems which reduce the costs for the operator and considerably increase the efficiency of the plant.
Conveyor belt cleaning is a very complex topic and a challenge which HOSCH has taken up from the very start with an extremely high investment in personnel and equipment. Concentrating on such a specialized technical task, we have acquired expertise in the field over the course of years. This has been achieved in co-operation with leading institutes in bulk material handling. The research and evidence has meant a considerable advance in knowledge for us.
For that reason, due to the wealth of experience gathered, HOSCH is considered the expert worldwide in all matters of conveyor belt cleaning. We consider ourselves to be qualified advisers to our customers. Our specialists are able to offer the best possible solution to the operators of the plants with our method and our technology.
No break for the forge of ideas:
In order to comply with their own claim to be the technical world market leader, HOSCH put a lot of work in ample research and development. In the headquarters, a team of a minimum of four is permanently busy with innovations. Using the latest simulation and calculation methods the engineers develop new products and seek to continuously improve the existing technology.
In the HOSCH-owned experimental laboratory, there are two conveyor belt systems available at which the innovations are tested for the subsequent field trial, exposing them to the severest conditions. A high-speed camera of the latest generation helps to analyse in detail the complex relationships between scraper and conveyor belt so as to finally optimize the systems.
Would you like to improve your equipment through a high-speed analysis? Please get in touch with us - we look forward to supporting you.
Sprung Scraper - Belt Cleaning Solutions
Worldwide advance in knowledge - underpinned scientifically.
The problem: When bulk material is transported on conveyor belt systems, the fines of bulk material stick to the returning belt due to adhesive properties at the discharge point. This leads to piles of material in the plant, which not only mean additional work for the operator, but also additional costs.
The solution: Since the foundation of the company in 1975, HOSCH has mainly been concerned with the development, production and sales of highly efficient conveyor belt cleaning systems which reduce the costs for the operator and considerably increase the efficiency of the plant.
Conveyor belt cleaning is a very complex topic and a challenge which HOSCH has taken up from the very start with an extremely high investment in personnel and equipment. Concentrating on such a specialized technical task, we have acquired expertise in the field over the course of years. This has been achieved in co-operation with leading institutes in bulk material handling. The research and evidence has meant a considerable advance in knowledge for us.
For that reason, due to the wealth of experience gathered, HOSCH is considered the expert worldwide in all matters of conveyor belt cleaning. We consider ourselves to be qualified advisers to our customers. Our specialists are able to offer the best possible solution to the operators of the plants with our method and our technology.
No break for the forge of ideas:
In order to comply with their own claim to be the technical world market leader, HOSCH put a lot of work in ample research and development. In the headquarters, a team of a minimum of four is permanently busy with innovations. Using the latest simulation and calculation methods the engineers develop new products and seek to continuously improve the existing technology.
In the HOSCH-owned experimental laboratory, there are two conveyor belt systems available at which the innovations are tested for the subsequent field trial, exposing them to the severest conditions. A high-speed camera of the latest generation helps to analyse in detail the complex relationships between scraper and conveyor belt so as to finally optimize the systems.
Would you like to improve your equipment through a high-speed analysis? Please get in touch with us - we look forward to supporting you.
Source: www.hosch-asia.com ■