Supply The Products You Need
Dear sirs or ladies!
We know you want to buy the products about crushers from the intenet.So we interested in your information.I think our company have the products you need.Now I introduce our proucts,I hope you can consider our company.
Our main proucts:
Jaw crusher,stone crusher, mining machine,impact crusher, Cone Crusher,mill,Ball mill,Raymond mill, Raymond grinder,Vibrating screen,Vibrating feeder,Sand washing machine,Sand making machine, vertical shaft impact crusher,High Pressure Suspension Grinder,Belt Conveyer,ect.
you can click our website (www.zenithcrusher.com/)
In addition:
Our company name :Shanghai Zenith Electric Power Equipment Co., Ltd.
If you intrest our products,please send email to cassidy886@gmail.com and leave your email.
Best regards
cassidy ■
Pyrite Crushing
You have to use two stage crushing.
Pyrites are not hard. Primary crshing can be done in a single toggle jaw crusher or an impactor. Desired size will be minus 20 mm.
This prodct can be ground in a verticle impact breaker (Barmac type) in closed cicuit with a 3 mm screen. ■
Re: Crusher For Pyrite Crushing & Grinding
Dear Mr. Verma,
For this, you require two-stage crushing plant, a primary reduction by a single jaw crusher. The output from the Jaw crusher at -40 mm than to be fed into Vertical-Shaft-Impactor (VSI). Since the material is abrasive in nature the VSI has to be rock-on-rock configuration. This will minmise your wear cost. You will require to put screen to seperate -3 mm to output, the above 3 mm particle will return to VSI for recirculation.
We are manufacturer of VSI.
Neelesh Desai ■
Re: Crusher For Pyrite Crushing & Grinding
Hi. VSI normally needs a lot of recirculation, and related conveyors. Screen size becomes big and area required is also more.
If pyrite ore is not very abrasive, may be you cah use a fixed blade horizontal shaft Impactor or a Hammer Mill. [Hammer Mill is better if you want - 3mm, but again it will produce fines, so it will depend if you need product in a close band or fines are acceptable]. If corrosion [ not abrasion] is the only problem , contact parts can be made of non-corrosive material.
Regards
Ravindra Lele ■
Crusher for pyrite crushing & Grinding
Dear sir
What is the best way to reduce pyrite ore from size 200 mm to 3 mm at 75 TPH capacity (dry circuit) at the maximum moisture level of 5 %.What will be suitable crusher liners available in market for such corrosive nature of ore.If any reference available for pyrite dry crushing and grinding for agricultural purpose.
Any online resources are preferred.
Thanks
Ravindra ■