ATEX Mixers by MAP®: the safe and economic solution for ATEX requirement
Thanks to many years of experience in mixing technology MAP® today is capable of offering a new dedicated solution for ATEX machines. The WBH and WAH, Batch and Continuous Mixer range has been re-engineered and upgraded according to ATEX requirements. The result is a new generation of mixers which combines reliable mixing quality with improved features.
The MAP® ATEX Mixers are the best solution to match market needs in terms of quality, maintenance, safety, environmental protection and price. Thanks to the use of proven standard parts, MAP® is able to offer an attractive price without compromising on quality.
There is a general need for machines that operate in explosive areas. MAP® Mixers perform product mixtures using different mixing technologies at maximum security and very low cost.
MAP® Mixers are designed for product development and production in all industries, e.g.:
MAP® Mixers are ideal mixing for all kinds of products. Their main application is in:
-powder + powder = mixing
-powder + liquid = granulation/agglomeration
-powder + liquid = mixing/moistening/coating
-powder + liquid = drying
The Horizontal Single Shaft WBH Batch Mixers and WAH Continuous Mixers are based on the principle of mechanical fluidisations of the product.
The particular shape, position and rotation speed of the mixing tools, creates a centrifugal vortex motion, which project the materials in a three-dimensional way and merges them. This ensures that components with different particle size and bulk density are perfectly blended and mixed with high precision within the shortest possible time.
WBH and WAH Mixers are used for mixing dry powders, granules or short fibres, for moistening, agglomerating or granulating the same materials, or for mixing liquids or pastes with low viscosity.
WBH and WAH Mixers consist of a mixing drum vessel with an inlet, an outlet (with discharge valve for WBH) and a venting spout, a mixing shaft, two drum closing end plates that carry flanged end bearing assemblies complete with integrated adjustable shaft sealing unit, and a drive unit complete with power transmission.
Ploughshare or inclined blade-type shovel tools rotate as mixing tools in a special arrangement on the mixer shaft in a horizontal, cylindrical drum. The result is a turbulence in the mix that constantly involves all the product particles in the mixing process. The formation of dead spots or slow-movement zones in the mixing drum is prevented ensuring precise mixing. In some cases, to obtain the desired mixing effect, separately driven high-speed choppers can be installed.
•Sizes: 75 to 25,000 litres;
•Drive units: 4.0 kW to 300 kW;
•End bearing assemblies with various types of shaft seals and option of air or nitrogen purging,
•Flush discharge valve (WBH only);
•Heavy-duty mixing chamber manufactured in carbon steel, anti-wear steel, or 304L or 316L stainless steel;
•Short mixing time;
•Maximum mixing homogeneity;
•Excellent reproducibility of batches (WBH only);
•Minimum wear;
•Low maintenance;
•Easy tool adjustment and replacement;
•Easy cleaning and access to all internal parts of the mixer,
•Optional anti-wear surface treatment;
•Liquid injection devices;
•Wide range of mixing tools (boxed ploughshare, toothed ploughshare, blade-type, toothed blade) available also with anti-wear coating.
ATEX Mixers by MAP®
ATEX Mixers by MAP®: the safe and economic solution for ATEX requirement
Thanks to many years of experience in mixing technology MAP® today is capable of offering a new dedicated solution for ATEX machines. The WBH and WAH, Batch and Continuous Mixer range has been re-engineered and upgraded according to ATEX requirements. The result is a new generation of mixers which combines reliable mixing quality with improved features.
The MAP® ATEX Mixers are the best solution to match market needs in terms of quality, maintenance, safety, environmental protection and price. Thanks to the use of proven standard parts, MAP® is able to offer an attractive price without compromising on quality.
There is a general need for machines that operate in explosive areas. MAP® Mixers perform product mixtures using different mixing technologies at maximum security and very low cost.
MAP® Mixers are designed for product development and production in all industries, e.g.:
MAP® Mixers are ideal mixing for all kinds of products. Their main application is in:
-powder + powder = mixing
-powder + liquid = granulation/agglomeration
-powder + liquid = mixing/moistening/coating
-powder + liquid = drying
The Horizontal Single Shaft WBH Batch Mixers and WAH Continuous Mixers are based on the principle of mechanical fluidisations of the product.
The particular shape, position and rotation speed of the mixing tools, creates a centrifugal vortex motion, which project the materials in a three-dimensional way and merges them. This ensures that components with different particle size and bulk density are perfectly blended and mixed with high precision within the shortest possible time.
WBH and WAH Mixers are used for mixing dry powders, granules or short fibres, for moistening, agglomerating or granulating the same materials, or for mixing liquids or pastes with low viscosity.
WBH and WAH Mixers consist of a mixing drum vessel with an inlet, an outlet (with discharge valve for WBH) and a venting spout, a mixing shaft, two drum closing end plates that carry flanged end bearing assemblies complete with integrated adjustable shaft sealing unit, and a drive unit complete with power transmission.
Ploughshare or inclined blade-type shovel tools rotate as mixing tools in a special arrangement on the mixer shaft in a horizontal, cylindrical drum. The result is a turbulence in the mix that constantly involves all the product particles in the mixing process. The formation of dead spots or slow-movement zones in the mixing drum is prevented ensuring precise mixing. In some cases, to obtain the desired mixing effect, separately driven high-speed choppers can be installed.
•Sizes: 75 to 25,000 litres;
•Drive units: 4.0 kW to 300 kW;
•End bearing assemblies with various types of shaft seals and option of air or nitrogen purging,
•Flush discharge valve (WBH only);
•Heavy-duty mixing chamber manufactured in carbon steel, anti-wear steel, or 304L or 316L stainless steel;
•Short mixing time;
•Maximum mixing homogeneity;
•Excellent reproducibility of batches (WBH only);
•Minimum wear;
•Low maintenance;
•Easy tool adjustment and replacement;
•Easy cleaning and access to all internal parts of the mixer,
•Optional anti-wear surface treatment;
•Liquid injection devices;
•Wide range of mixing tools (boxed ploughshare, toothed ploughshare, blade-type, toothed blade) available also with anti-wear coating.
For more information, please visit:
https://edir.bulk-online.com/profile/1675-wamgroup.htm1675 wamgroup.htm
Corporate Profile:
https://forum.bulk-online.com/showth...WAMGROUP-S.p.Ashowthread.php?19316 WAMGROUP S.p.A.
Google Search:
http://www.google.de/search?sclient=...ulk-online.comsearch?sclient=psy&num=10&hl=de&lr=&client=safari&rls=de de&source=hp&q=wam+site%3Abulk online.com
http://www.google.de/search?q=wamgro...=lnms&tbm=ischsearch?q=wamgroup+site:bulk online.com&hl=de&lr=&safe=active&client=safari&rls=de de&prmd=imvns&source=lnms&tbm=isch
WAMGROUP ist ein "bulk-online Leader"index.php ■