Re: Pet Coke Crushing
Amit,
Would an Impactor be of use?
What tonnage per hour and do you need static, mobile or track mounted?
Regards,
Brian ■
Re: Pet Coke Crushing
Dear Mr. Amit
I suggest you for IMPACTOR type crusher but for that your feeding shuld be uniform through out the crusher opening & should also feeded from low hight.
Govind Pandey ■
Impact Crusher
Dear Mr A Soni
I suggest you to go TRF Impact crusher
Thanks
B Dinesh ■
Re: Pet Coke Crushing
Dear Mr. Soni,
Pls. e-mail me your contact nos. for our further communication with you
for selecting Coal Crushing.
Regards,
AMIT SHETH
EXECUTIVE APRTNER
UTILITY ENGINEERS
210 - VEENA CHABMERS,
21 DALAL STREET,
OPP. BOMBAY STOCK EXCHAGNE TOWERS,
FORT, MUMBAI - 400 001.
TEL:+91-22-22676936 / 34
T/F:+91-22-22676934
CELL:+91-9869031395
E-mail:utilityengineers@mtnl.net.in
■
Re: Your Question
You can use our VSI vertical shaft impact crusher to crush the pet coke down to 6mm, however this type of crusher can not give 95% products output. You know, you can use a vibrating screen after the crusher, the output products with size <6mm will be screen out as final products, and the output products size>6mm will be return back to the crusher for re-crushing.
Can you send your contact information to me? So that we can consult with you for more information.
Henan Liming Road & Bridge Heavy Industry Co., Ltd
www.break-day.com
break-day@break-day.com and webmaster@lmlq.com ■
Re: Pet Coke Crushing
Dear Mr. Soni,
We are specialized in sampling of Coal/Cokes and Pet Cokes. In our sample preparation we crush the samples with a jaw crusher. We advise not to use a hammer crusher as pieces of iron can contaminate the sample.
I suggest that you contact diverse manufacters and as mentionned before
Petroleum Coke is not a hard material. This can effect the choice of your crusher.
There is a lot of information about manufacturs on the internet (f.e. www.grundlachcrushers.com). When you google
Hopefully this answer can help you further.
Kind regards,
Dave Chanet ■
Re: Pet Coke Crushing
Sir,
Please advise the feed rate capacity of the -50mm pet coke that is to be crushed to -6mm.
Dave Schellberg
McLanahan Corporation
Hollidaysburg, PA USA
e-mail > dschellberg@mclanahan.com <
web www.mclanahan.com
QUOTE=ansoni;57649]Dear Sir,
Coal Size of Pet Coke is (-) 50mm and Crushing to (-)6 mm.
Please guide me to select Crusher Type which can consume less power and give 95% Product output.
Regards,
Amit N Soni[/QUOTE] ■
Pet Coke Processing
We are Alstom Power, Raymond Operations and produce the Raymond Bowl Mill and Raymond Roller Mill for pet coke processing.
I have attached product literature for your review, you can also visit our website at www.raymondpulverizers.com.
For further information please contact Mr. Dennis Poirier at +1.203.918.8690
Attachments
pb3906 - raymond bowl mill coal & pet coke app (PDF)
■
Pet Coke Crushing
Dear Sir,
Coal Size of Pet Coke is (-) 50mm and Crushing to (-)6 mm.
Please guide me to select Crusher Type which can consume less power and give 95% Product output.
Regards,
Amit N Soni ■