Replies
Roling 120 Mm Plate
Posted on
28. Oct. 2011 - 09:36
There are many that can roll 120 mm plate. If you are constructing a mill shell, you might try CITIC in China. They just completed fabricating world class 42 ft mill shells in the same thickness range, but much longer. The shell segments can be seen on: http://www.china-mining.org/en/media...0Expertise.pdf
Of course there are many other mfgrs capable of similar feats such as Metso, who also have or are fabricating a 42 ft. mill - Google required. ■
Lawrence NordellConveyor Dynamics, Inc.website, email & phone contacts:www.conveyor-dynamics.comnordell@conveyor-dynamics.comphone: USA 360-671-2200fax: USA 360-671-8450
Rolling 120 mm Thick Plates
Gentlemen,
can anyone recommend of reliable producer that can handle with rolling
120 mm thick plate AH36 (similar to ST.52 )
Could be done by either hydraulic rolling machine or by press machine
size 3X3.66 m , rolled to 14 m’ dia (7 m’ radius), total of 8 complete cylinders ( 96 segments ).
heat treatment allowed is up to 250 Celsius degrees.
please advice,
sagiv ■