Re: Difference Between Fag And Skf Bearings
In my experience, NOTHING.
Unless you by cheap and end up with some counterfeit units with all the right marking but none of the FAG/SKF quality! ■
Bearing Quality
I agree with my fellow, all depend how the selection and calculation for life time unther your specific conditions. In comparative both brands shall be same quality.
BR. ■
Re: Difference Between Fag And Skf Bearings
thanks for replies ■
Re: Difference Between Fag And Skf Bearings
I'm not sure I'd be buying FAG or SKF bearings over the internet from China ■
Re: Difference Between Fag And Skf Bearings
Hello,
I concur with designer; get the bearings from a factory rep only. There are a ton of fakes around.
As to preferring one manufacturer over another you need to really know what the bearing description and type is in the first place. Do not get fooled by bearings that carry the same model number as they can still have different rolling element quantities and -in case of tapered or angular contact bearings - a different contact angle. If you are lucky and this is the first overhaul keep the original bearing and get the same bearing model number and manufacturer. Prefix and suffix must be the same and do not forget to check the inner races of especially cylinder roller bearings for the correct "C" clearance code. Finally look at the bearing cage and get the same material again if possible. ■
Bearings
we were unable to get FAG bearings from FAG directly
so we tried to procure some from hong kong as the supplier said they were FAG dealers
we imported a bearing each from 2 sources and both turned out to be fake bearings
so be careful when you buy bearings is best to get them direct from the manufacturer ■
Re: Difference Between Fag And Skf Bearings
I have been ussing SKF,FAG and NTN bearings in conveyor system, since many years with equal satisfaction.Generally people have a preference towards SKF.
Rgds,
Nalinakshan ■
Difference between FAG and SKF Bearings
Hello , could anyone tell me what is the diference between fag and skf bearings , which should i choose in conveying system , loading bulk fertilizers .
Thanks . ■