Re: Carbon Black Conveying
Sir,
If you are looking for a new conveyor system, you may be interested in WipWare's automated sieving technologies. Our systems can be installed on conveyor belts for continuous monitoring of materials, and will offer superior results to manual sieving.
Please contact me if you are interested, and visit www.wipware.com for more information.
Regards,
Mark Wagner
WipWare Incorporated
Tel: 1-705-472-2664
Fax: 1-705-472-2645
email: sales@wipware.com ■
Carbon Black Conveying
Please clarify if you are handling pelleted carbon black, carbon black powder, or carbon black "fluff". Pelleted carbon black will be the easiest material for conveying and storage. Bulk density of pellets is about 15 lbs/cu ft but the fluff has a density of only about 4.
Pneumatic conveying can be used if you prefer this mode of conveying. For only 25 ft it will be more cost effective to elevate the bags of carbon black and dump the bags in the storage bin.
Regards,
Amrit Agarwal
Consulting Engineer
Pneumatic Conveying Consulting
Email: polypcc@aol.com
Ph and Fax: 304 346 5125 ■
Re: Carbon Black Conveying
Dear Vikram,
We can supply you the necessary equipment. Kindly send me your enquiry at solanairtech@sify.com
Thanks and Regards,
Vikas Gaikwad ■
Re: Carbon Black Conveying
500kg/h is a small capacity to transfer in 25ft long distance, if material degradation is not important , the vacuum transport is enough,
■
Carbon Black Conveying
We need to transport carbon black powder from floor level to a process Silo at 25 ft height. the coveying rate should be 500 kg/hr.
Pls advice if anyone can help us with a suitable system ■