Grinding Zisio4 Sand
Dear Sir,
Now,they are almost grinding by wet processing in china.they used ball mill about 10MT with alumina grinding ball. IF you want more information,Pls contact with me. we will tell you.
David xu,
Pingxiang Hetian Ceramic Co.,Ld.
Tel:+86-799-6612508
Fax:+86-799-6612888
E-mail:mail@cdtceram.com.cn
http://www.cdtceram.com.cn/encp4.htm ■
Re: Need Ultra Fine Milling And Classification Info
Mr David,
I had Mailed you with a request for information. Havent heard from you yet. would be good if you can respond back to my query.
Ranjit.S ■
Re: Need Ultra Fine Milling And Classification Info
Check out our website at www.airpreheatercompany.com we manufacture mills for ultra fine grinding. ■
Re: Need Ultra Fine Milling And Classification Info
Could you please give me a cost for the mills and classifier system for the product i have mentioned above. you can email me at ranjititp@yahoo.com with a brochure and cost statement. ■
Grinding And Coating Of Minerals
OME Malaysia has for mission the engineering of-the art ultra-fine classifying, grinding and coating of minerals.
We are dedicated to produce air classifiers, pin-mills, ball-mills and wet pearl mills.
Constant innovation on our classifiers has lead to sharper cuts, less maintenance and the ability to produce minerals of d98<8µm.
We can supply you with finest quality equipment at a good price we have experience in the field and had already installed many plants in Malaysia, Thailand and Saudi Arabia.
Please fill free to send your enquiries and we will be happy meet you and discuss your project.
Hayayoo@yahoo.com
Marketing Manager
Have a Nice Day
hay ■
Re: Need Ultra Fine Milling And Classification Info
Thank you, Mr Hay for the valuable information. will get in touch with you over email soon. you can also correspond with me at ranjititp@yahoo.com or at my cell phone 1-240-421-5930(US) ■
Ultrafine Minerals
There isnt enough information in your request to giveyou a definative answer.
The size of the production equipment and the amount of energy required to produce the product will depend greatly upon the final particle size of the product - and there is a huge difference in the requirment for a product that is 50% below 5 micron versus one say 99.99% below 2 micron.
Could you give a more specific final product size specification please.
Do you have constraints on area available for the location of this plant? I presume the plant will run 24/7 or will it produce to requirment?
If you can give me the above information I can start to give you some equipment /production route choices and further information.
R Woosnam
www.procengtech.co.uk ■
Re: Need Ultra Fine Milling And Classification Info
Mr Woosnam,
Thanks for your reply. And am sorry for the late reply, i was held up in a Software venture in the meanwhile.
Ideally we would like to have 95% passing 5 microns and lesser.
There are no constraints on Area Available for the plant.
and Yes it would be a 24/7 operation on an average unless there is downtime.
Any information on the machinary will be valuable for our project and when evaluated to be viable will progress in the direction of procurment.
thank you.
Ranjit.S ■
Re: Need Ultra Fine Milling And Classification Info
Zirkonsilicate of fineness with d50 = 1.1 micron is called Opacifier and used in the ceramic industry.
The most economical way is to produce it by means of ball mill in combination with classifier. The product is directly ground in a closed loop grinding circuit. To avoid contamination of the Zirkonsilicate the complete system has to be lined by means of high quality aluminium oxide.
The capacity of 1 - 2 t/h is reasonable.
For more information please contact:
Rober Rosen
r.rosen@alpine.hosokawa.com ■
Re: Need Ultra Fine Milling And Classification Info
Robert,
I have sent an e-mail to you in regards to my background as well as the company I work for (General Kinematics).
Best Regards,
Todd ■
Powder Processing
Please contact me if you are still looking for technology to reduce size and classify particle size. We can offer the most rapid and economic technlogy for the required application. ■
Untitled
Dear Ranjit.S,
We are one of the biggest manufacturer of grinding steel balls in china, our company SHANDONG HUAMIN CASTING AND FORGING JOINT-STOCK CO.,LTD can produce several kinds of grinding ball 50,000 ton annnual and exports to more than twenty countries and areas such as Japan, Korea, Canada and South Africa and has obtained a high reputations from the customers.
We think your grinding ball mill need use of grinding forged steel balls for mineral, and could you tell us you uses steel balls sizes, I will give you a detailed information .
Hope to do business with your company.
Best Regards !
Lingna
===============================
SHANDONG HUAMIN CASTING AND FORGING
JOINT-STOCK CO.,LTD
YANGJUN VILLAGE,GUANZHUANG TOWN,
ZHANGQIU CITY,SHANDONG PROVINCE,
P.R.CHINA
TEL / FAX : 0086-531-83809108
E-mail : hmzd@163169.net
Attachments
■
Re: Need Ultra Fine Milling And Classification Info
Dear Ranjit
techno designs can help do this plant in India as it already have done this in India at Pondycherry and the size is 1T/Hr for the same plant and same product.
Kindly contact us at our e mail kishorbajaj@yahoo.co.in ■
Netzsch
Dear Sir,
please contact me regarding your project for further information.
We have experinence in grinding and classifying of hard material ultra fine, dry griding.
Please come back.
My email is harald.gessner@ncx.netzsch.com
Kind regards
Harald Gessner ■
Alumina Ceramics, Zirconia Ceramics & Zta
Wear resistant ceramic lining – Alumina, zirconia & ZTA
Ceramic grinding media – alumina & zirconia
Steel & rubber backed ceramic plate
Pulley lagging
https://aluminaceramics.wordpress.com/ ■
Milling Equipment Exporters
Dear Sir,
We are one of the best powder processing machinery companies in China. Ftmmachinery is a leading company in Industrial powder processing, Engineering Stone crushing and Construction Sand Making.
We are a professional manufacturer that produces and sells Raymond mills, ball mills, ultra-fine mills and dust collectors, and has advanced special production and processing equipment.
We can process various materials such as calcite, talc, dolomite, marble, gypsum, barite, clay, kaolin, quicklime, etc. You can read kaolin grinding, calcite grinding, feldspar processing
Mills are widely used in the grinding and processing of mineral materials in metallurgy, building materials, chemicals, mining and other fields.
Welcome all the customers from worldwide to browse our website and choose our machinery. ■
Re: Need Ultra Fine Milling And Classification Info
Please let me know if you have any specific questions regarding ball mills.
Best Regard,
Todd ■
Ball Mill
Dear Todd,
How we can start, I don't know in which case you may can help. Maybe you send me an e-mail with some more information about yourself and your specific knowledge about ball mills.
On that basis we could find a way to exchange our know how.
I'm waiting your answer and remain,
with best regards
Robert
r.rosen@alpine.hosokawa.com ■
NEED Ultra Fine Milling and Classification Info
Hi all,
I am a young enterprenur who is trying to set up a Ultra Fine Mineral Grinding and classification plant. In this regard i would like to put forward request for information, machinary offers.
Product: Zirconium Silicate
Final Micronised product Size: 2-5 microns.
Capacity of grinding and classifying plant : 1 Ton/hour.
I would to request all the Machinary providers to get back at me with brochures and cost.
Moreover could anyone clarify which grinding technology is best suited to arrive at micron value of 2-5 at a 1 ton/hr capacity.
Is a AIR JET Mill good for this or the Continour ball mill technology good. Please get back with all the information you have.
Ranjit.S ■