Re: Wear Resistance
You need one of these -
http://www.mid.uk.com/documents/rotary/twa.php ■
Re
1-It 's so expensive
2-use for very abrasive product
3-it's protect only from body ■
Carbon Steel
you can use st37 usually and st52 for abrasive product. ■
Wear Resistance Upgrades For Rotary Valves And Blowing Seals.
Here are a few wear resistant options that you might like to consider.
Omegaslate has more than 25 year experience upgrading rotary valves and blowing seals for extreme abrasion duties.
Regards,
Mike.
Attachments
superseal rotary valve upgrade systems [compatibil (PDF)
aib quarrying no.9 case history (PDF)
■
Re: Wear Resistance
hi purity aluminum oxide solid ceramic - coors ceramics 9th street golden co can give you chapter and verse on the subject. pete ■
Re: Wear Resistance
Specification of Wear Resistant steel plate:
Product Brand: KX / HG
Thickness of base steel plate: 6mm ~ 15mm;
Thickness of wear resistant Layer (Weld Deposit ): 4mm ~ 15mm;
Surface Hardness (HRC): 54 ~ 62 HRC;
Wear resistant plate dimension (W*L): 1500mm * 2000 / 6000mm;
We can design the special wear resistant steel plate according to the customer’s requirements and engineering drawing. Our products will help you to make different shape wear resistant parts easily through the cold forming processing, cutting and welding in your workshop.
Usage advantage of Wear resistant steel plate:
----- Decreasing the maintenance cost of equipments.
----- Improve the equipment operation rate.
---- Reduce the energy consumption of mill equipments.
---- Decreasing the environmental pollution for the leakage scrap from the worn out plate and reduce the cost of labor for keeping the clean in the plant. .
Application:
Cement industry:
Feeder equipment, Wind blade and lining, Crusher lining, excavator grab, Mill lining, Body of pump, Worm conveyer, Bunker, Chute, powder concentrator blade.
Power plant: Coal Mill Lining, Clinker, coal crusher, Charging Bucket,
Coal mining: Chute lining plate, Bunker, Chute, Lining for coal crusher,
Other application: Mixer parts, Mould of brick, Coke transfer chute, Port Handling system, Mining machine ceiling, Grab, fitting and Elbow. ■
Re: Wear Resistance
Hallo
There is few way how to solve this problem, but is important to know the position in pipe line. Method of operation
1) more reasistant and wery expensive valve
2) chang the situation before valve (In the closed position, the valve can protect the transported material) This method will increase the life of several-fold. And finally you find that you do not have to use either ball valves, but common seal knife.
But it wants to know more ■
Re: Wear Resistance
Product Brand: KX / HG
Thickness of base steel plate: 6mm ~ 15mm;
Thickness of wear resistant Layer (Weld Deposit ): 4mm ~ 15mm;
Surface Hardness (HRC): 54 ~ 62 HRC;
Wear resistant plate dimension (W*L): 1500mm * 2000 / 6000mm;
We can design the special wear resistant steel plate according to the customer’s requirements and engineering drawing. Our products will help you to make different shape wear resistant parts easily through the cold forming processing, cutting and welding in your workshop.
Usage advantage of Wear resistant steel plate:
----- Decreasing the maintenance cost of equipments.
----- Improve the equipment operation rate.
---- Reduce the energy consumption of mill equipments.
---- Decreasing the environmental pollution for the leakage scrap from the worn out plate and reduce the cost of labor for keeping the clean in the plant. .
Application:
Cement industry:
Feeder equipment, Wind blade and lining, Crusher lining, excavator grab, Mill lining, Body of pump, Worm conveyer, Bunker, Chute, powder concentrator blade.
Power plant: Coal Mill Lining, Clinker, coal crusher, Charging Bucket,
Coal mining: Chute lining plate, Bunker, Chute, Lining for coal crusher,
Other application: Mixer parts, Mould of brick, Coke transfer chute, Port Handling system, Mining machine ceiling, Grab, fitting and Elbow.
These specifications helped me a lot. Thanks for posting. ■
Alumina Ceramics
CBC supplies alumina tubes, cyclone, cone, blocks, tiles for wear protection.
Zhanghongbocbc@163.com
----------------------------------
http://aluminaceramics.blog.com ■
Wear Resistant For Vane Of Rotary Valve
Maybe u can use the alumina or zirconia ceramic tile lined the equipment to against the abrasion.
more details in www.kingcera.com. or send the messages to micheal@Kingcera.com ■
Ceramic Lined Valve
We suggest you to use ceramic lined valves to solve the problem caused by abrasive mediums.You can find some more information at www.ceramic-valves.com ■
Alumina Ceramics, Zirconia Ceramics & Zta
Wear resistant ceramic lining – Alumina, zirconia & ZTA
Ceramic grinding media – alumina & zirconia
Steel & rubber backed ceramic plate
Pulley lagging
https://aluminaceramics.wordpress.com/ ■
Wear Resistance
Dear Sir
Can anyone suggest me the material for body and vane of rotary valve in cement plant.
thanks in advance
regards ■