Replies
Designer Wanted
Posted on
24. Sep. 2010 - 06:37
Will you pay for the design or do you want free advice? ■
Lawrence NordellConveyor Dynamics, Inc.website, email & phone contacts:www.conveyor-dynamics.comnordell@conveyor-dynamics.comphone: USA 360-671-2200fax: USA 360-671-8450
Designer Wanted
Posted on
24. Sep. 2010 - 06:50
Will you pay for the design or do you want free advice?
Why not 3-roll idlers? You are asking for advice and then giving it. Seems a contradition.
After making a review of the design, I suggest you get advice and do not try to do it on the cheap. ■
Lawrence NordellConveyor Dynamics, Inc.website, email & phone contacts:www.conveyor-dynamics.comnordell@conveyor-dynamics.comphone: USA 360-671-2200fax: USA 360-671-8450
Re: Overland Conveyor Feasibility Study
Posted on
24. Sep. 2010 - 07:28
His profile says he's a student .................... ■
Hi
Posted on
24. Sep. 2010 - 01:09
Yes I am student ■
Overland Conveyor Feasibility Study
A straight belt conveyor is to be designed to convey crushed bauxite over a distance of 3.4 km. An initial
static design is required to estimate the economic viability of the project. Data supplied for the initial
design is as follows:
The throughput of the system is to be 2250 t/hr.
The bulk density of the crushed bauxite is 1250 kg/m3 and the conveyor surcharge angle is 15o.
How I can Selection of belt width, type and rating
I design B=1200mm V=6 k/s
but I don't lnow if that true on not any I don't choose 3-Idler System
Attachments
belt_3 (JPG)
■