Timing Angle
Generally, largest percentage or typical line of angle on linear or horizontal thru CG is 45 degree timing angle.
George ■
Re: Linear Motion Screen Line Of Action
Shashank
Read some threads about design vibrating screens and come up with a specific problem - for general question you are goign to get general answer.
Regards
Ziggy ■
Linear Motion Screen Line Of Action
Dear shashank!
In case of classifying screens most of the screen manufacurers use 45° stroke angle relative to the base line of the screen side wall.
Others use 60° and inclinate the whole body at minimum 8°, max. 12°.
The screen body has an acceleration of 3.5 up to 5 or 6g, depending on the size and requirement. This acceleration is in direction of the stroke. You have to divide this acceleration in two vectorial components: one 90degrees to the screen bottom and the other in line of the screen bottom.
At 45° both components are about 71% of overall acceleration. Simplified you have now for conveying 71% and for screening you have now also 71%.
In case of 60° you have for screening 86% and for conveying 50%. This lack of conveying can be compensated by some inclination.
So as a conclusion: Classifying screens...Choose 60°, inclinate 8° - 12°
In case of too less place to inclinate, choose 45°.
Dewatering, deturbinding screens: not more than 45°
Hope we could help, regards
B.Peyfuss, PEYTEC OEG
Floesserstrasse 23
3335 Weyer, Austria
0043 664 4038659
www.peytec.at ■
Linear motion screen line of action
Dear sirs,
Good Place to get good direction of problem solving thanks for the informations provided here in this forum
i am shashank a student completed graduation in INDIA and recently joined as a G.E.T.
Right now i am working on linear motion screen. i would like to know recomended line of action degree through the C.G of the linear motion screen machine.
and also i would like to know even more information about linear motion screen.hich can help me further
of cource some of the threads are updated me littile bit...but still looking for some thing ....... ■