Grizzly Vs Eccentric Disc Screen

Posted in: , on 24. Aug. 2009 - 09:35

Dear Sir,

We are facing a problem in selection of Grizzly Vs Eccentric Disc Screen in one of the project.

We got some feed back that Eccentric disc is a problematic one.

We are receiveing a coal from port. From port it is directly conveyed to Screens. Coal received size shall be 300 mm. Moisture in the range of 20 % maximum & 40% fines. Please give a suitable solution on this.

T. KARTHIK BANGALORE

Re: Grizzly Vs Eccentric Disc Screen

Posted on 25. Aug. 2009 - 07:04

Mr Karthik

Grizzly will be much simpler option and less expensive.

Regards

Ziggy Gregory

Ziggy Gregory www.vibfem.com.au

Coal Etc.

Posted on 25. Aug. 2009 - 03:11
Quote Originally Posted by KARTHIK.TView Post
Dear Sir,

We are facing a problem in selection of Grizzly Vs Eccentric Disc Screen in one of the project.

We got some feed back that Eccentric disc is a problematic one.

We are receiveing a coal from port. From port it is directly conveyed to Screens. Coal received size shall be 300 mm. Moisture in the range of 20 % maximum & 40% fines. Please give a suitable solution on this.

Why not simply install a coal breaker to guarantee 2 inch material and eliminate the screens if they are not installed yet?

lzaharis

Re: Grizzly Vs Eccentric Disc Screen

Posted on 2. Dec. 2009 - 05:36

With a grizzly you have fewer parts to maintain and material does not contact the drivetrain components.

If you would be interested, our two-mass grizzly concept uses 1/3 the energy of a conventional direct drive grizzly and is custom designed for your process.

http://www.gkmining.com/proddesc.cfm/productid/93

Thank you,

Thomas Musschoot

General Kinematics Corporation

www.generalkinematics.com

kurraprashanth
(not verified)

Re: Grizzly Vs Eccentric Disc Screen

Posted on 15. Jun. 2010 - 08:28
Quote Originally Posted by tmusschootView Post
With a grizzly you have fewer parts to maintain and material does not contact the drivetrain components.

If you would be interested, our two-mass grizzly concept uses 1/3 the energy of a conventional direct drive grizzly and is custom designed for your process.

http://www.gkmining.com/proddesc.cfm/productid/93

Thank you,

Thomas Musschoot

General Kinematics Corporation

www.generalkinematics.com

Sir, can u pls tell me what is the maximum aloowable moisture % , that can be used for Grizzly screens for indian coal of -300mm input

nalwaya
(not verified)

Grizzley Screens

Posted on 29. Jun. 2010 - 06:39

Dear Kartik,

I understand you are located in india. pl. contact us. We are the representative of M/s General Kinematics Corp. USA for India.

As regard your qurey regarding moisturem, 15% moisture can be handled without much of problem.

K.S.Nalwaya

Managing Director

KSN Tech Ventures Pvt. Ltd,

580, Sector-A, Pocket-C,

Vasant Kunj, New-Delhi-110070, India

Tel: 91 11 26894490/26121191

Fax; 91 11 26124970

Cell; 91 9811255464

E-Mail; ksnventures@gmail.com