Re: Explosion Vent Manufacturers
There are many companies -
http://www.go4b.co.uk/uk/explosion-vent-panels.asp
http://www.fike.co.uk/products.htm
http://www.elfab.com/gb/pr/explosion-vents/
http://www.rembe-safety-control.de/e...rotection.html
http://www.safetysystemsuk.com/marston/ventpanels.html
http://www.explosionhazards.co.uk/pr...on-vent-panels
Enough ■
Re: Explosion Vent Manufacturers
http://www.go4b.co.uk/uk/explosion-vent-panels.asp
http://www.fike.co.uk/products.htm
http://www.elfab.com/gb/pr/explosion-vents/
http://www.rembe-safety-control.de/e...rotection.html
http://www.safetysystemsuk.com/marston/ventpanels.html
http://www.explosionhazards.co.uk/pr...on-vent-panels
Enough
Dear designer,
Thank you for your reply and information. It is very kind and helpful of you.
I will try to make contact with them.
Regards,
Hiandy ■
Explosion Vent Manufacturers
Hiandy,
Fike have a rep in Indonesia...I suggest you contact Fike's regional office in KL to get the details... email Nelson.Wong@fike.com and/or Stanley.Sigle@fike.com
Regards,
Tim Dewis
Fluid & Chemical Services Pty Ltd.
Sydney
timdewis@fluidchem.com.au
www.fike.com ■
Re: Explosion Vent Manufacturers
Hi Hindy,
Our company is based in Sydney and we design and supply Explosion protection equipment for a large number of industries. We have both standard and engineered solutions for almost all explosion venting applications.
Should you wish further details please visit our web site at www.novaprotection.net.
Cheers.
Tony Vierboom. ■
Brilex Explosion Vents -
Hello Hiandi
We represent Brilex , www.brilex.de and sell to Australia , New Zealand, Indonesia and other countries in Asia.
Brilex makes a very reliable product for indoor and outdoor dust explosion applications - using state of the art machinery like robots, presses and laser cutters. The quality and reliability is high.
If you need to discuss further please contact.
Con Carpis
CMC Technologies Pty Limited
Unit 19, 77 Bourke Road
Alexandria NSW 2015 Australia
Ph +61 2 9669 4000
Fax + 61 2 9669 4111
email : sales@cmctechnologies.com.au
web www.cmctechnologies.com.au ■
Rembe Explosion Vents
Dear Hiandy,
my name is Peter Zabel and I am the regional manager for REMBE, based in Singapore.
You can forward enquiries to me at peter.zabel@rembe.com or, even better, contact our Indonesian distributor PT Mitra Wira Pratama at engineer@mitrawp.com
Thanks and best regards
Peter
www.rembe.de
Dear Sirs,
Hi everybody,
My name is Hiandy from Indonesia. I am a very new member in this forum.
I am looking for some companies manufacturing good explosion vent product.
I would really appreciate if some of you could help me inform such companies.
Look forward to having your help and thank you for your kind attention.
Kind regards,
Hiandy
■
Re: Explosion Vent Manufacturers
BS&B Explosion Vents
Hi Hiandy, BS&B Pressure Safety Management, LLC provides a wide-array of choices for explosion vent products. The company is a proven industry leader with over 75-years experience in providing pressure relief devices. For assistance in determining the best product for your needs please contact Tommy Chau at Tommy.Chau@bsbsystems.com. He's a fantastic explosion vents sales manager with a reputation for quickly responding. The company's website is located at www.bsbsystems.com
Sincerely,
Keith Davenport
BS&B Safety Systems
keith.davenport@bsbsystems.com ■
Explosion Protection - More Than One Step
Look at
href="http://www.explosioncontrolada.com/" target="blank">http://www.explosioncontrolada.com/
to see that you need
preventive and control measures
inerting
(supresion)
venting
and also valves to avoid the explosion to "travell" through the ducts
best regards
dirk
href="mailto:bulk.good.solutions.ar@gmail.com">bulk.good.solutions.ar@gmail.com
buenos aires
Attachments
tv_secure.explosion.vent_vent (JPG)
■
Re: Explosion Vent Manufacturers
Great bags.. really beautiful..I'm very interested! I would love to find out more. ■
Re-Usable Self-Reclosing Explosion Vents
Hello,
until now the most suggested the "only once use" explosion vents
but
there are the re-usable self-reclosing explosion vents
made by THORWETSEN VENT
also called explosion relieve doors
www.thorwesten.com
The very advantage of Thorwesten vents is self-reclosing:
when an explosion happens
this vents opens and close again immediately avoiding
new fresh air, i.e. oxygen, to come into the silo, dust collector or what ever
and so secundary explosions should not happen
The explosion rupture panels and discs let an open fresh-air-window after an explosion
That does not mean that they are not good to use
it is a matter of probability and costs (to buy rupture or self-reclosing vents, cost of lost of production-time in case of an explosion, ..., repair-costs after an fire in your vessel, ...)
The other advantage of Thorwesten vents is re-usable:
You do not loose the venting door after an explosion
and in the most cases you start production again after a short time
and also you do not need an replacement in your factory.
In case of rupture panels and discs you have to have a replacement ready considering the delivery time of new one
Do not forget the explosion PREVENTION:
+ CO and O2 analysis - robecco - www.robecco.de - added to
+ inertizing - Yara
SPRAY DRYING
In case you consider to protect a drying process, like milk powder production, you should consider
+ in-door explosion vent (like Brilex and Rembe offers)
be care-full: the flame can not get trough the flame-filter but the very hot gases does
+ explosion suppression
a sensor detects an incipient explosion and extinguish it in milisecond befor dangerous pressures in the vessel are reached
Get in touch with www.incom-ag.ch for both solutions
but much better ...
write me .... in our "technology pool" we represent complementary explosion PREVENTION and also explosion CONTROL experts
info@explosioncontrolada.com
www.explosioncontrolada.com
It does not matter were your factory is located, I contact you to the best technology choice
And last ...
do not confuse Inertization with Suppression
Inertization prevents an explosion and acts before an explosion starts
Suppression starts after an explosion already are beginning
Keep looking and learning :-)
Regards
diego ■
Self-Reclosing Re-Usable Explosion Vents
I see my post was lost, so again ...
Self-reclosing re-usable explosion vents
www.thorwesten.com
1) the very advantage of self-reclosing explosion explosion vent doors
is
that the doors close fast (miliseconds) after an explosion was relieved
and avoids that fresh air with oxygen comes into the vessel you are protecting (silo, dust collector, ..., dust tight chain conveyor, ...)
and so secondary explosions and fires inside should not happen
Rupture discs and panels burst and let an open fresh-air-window on your vessel
Fire will have enough oxygen to keep alive and other explosion could happen
But the rupture devices are not bad
It is a matter of probability, acquisition costs, production-stop-costs, repair-costs after an fire, ..., and the cost of having spare-parts of rupture devices on you factory depending on the delivery times
2) the advantage of re-usable is that you
do not need an replacement-door in your factory
can re-start your process after an short time
Please consider also explosion PREVENTION
+ analysis of CO and O2 in vessels, ducts, mills, dust collector - robecco GAS - www.robecco.de
added to
+ inertization with CO2 or N2 - Yara
The analysis measure the gases and also analyses the changes of the gas concentrations and can prevent that the concentration reaches the security limits
That is an important difference to switches which alarm only when the limit was already reached; too late because the in case of alarm you are already in danger !! With the gas analysis you can avois to come into the dangerous concentration zone
Inertization acts to prevent to reach the danger limit injecting inert gas into your installation; this is an important PREVENTION of explosions
Of course, to use the gas only in case you need it, you habe analyse the CO/O2 concentrations first
We are Representatives of complementary technologies for explosion protection, prevention and control:
prevention: robecco, Yara
control: Thorwesten, ...
We have colleges in Indonesia and we will contact you immediately with the best technology choice and the next contact to your factoy
info@explosioncontrolada.com
www.explosioncontrolada.com
Regads
Diego ■
Explosion Vent Manufacturers
Look for company explosion vent
Dear Sirs,
Hi everybody,
My name is Hiandy from Indonesia. I am a very new member in this forum.
I am looking for some companies manufacturing good explosion vent product.
I would really appreciate if some of you could help me inform such companies.
Look forward to having your help and thank you for your kind attention.
Kind regards,
Hiandy ■