Re: Rules Of Thumb
ccervera:
There are many possible methods of controlling dust that is generated at transfer points. Which method is best suited for your application will depend on the dynamics specific to the operation.
You will probably require a chute change, skirting. and a rubber exit curtain. You may require a plenum, dust collection, filters, et cetera.
To determine what is best suited for your application contact companies or representatives that specialze in this type of work. In the US, you can contact Martin Engineering or Benetech. Benetceh's web site is www.benetechusa.com and Martin Engineering's address can be obtained from the directory on this site.
Good luck in your search. ■
Solutions
I trust some of this information has been helpful to you. You may find more resources through such search engines as www.airpollutioncontrolsystems.com or www.dustcollectionsystems.com
Good Luck ■
Dust Surpression
Check out a product called "g-cat" on
http://www.thegulfgroup.com.au ■
Dust Suppression
Good day,
I am MD of Benetech SA, based in South Africa and would be happy to have my engineering department look at your problem in more detail, please feel free to contact me at pronet1@mweb.co.za
Kind Regards
Andy Miller ■
Dust Management
To find more information on Benetech in general, you may consult the website www.benetechusa.com.
Benetech GmbH in Germany has extensive experience with dust management for hard and brown coal conveyed. Among others, Benetech GmbH has been a partner of MIBRAG, the largest brown coal producer of Germany for many years now, providing dust suppression for their brown coal mine.
The Benetech Engineering departments will be pleased to help you in finding a solution for your dust problem.
Best regards,
Benetech GmbH
Karl Liebknecht Str. 27
D-06682 Deuben near Leipzig
Germany
Email: benetech@gmx.de
Tel: +49-34441-445-0
Fax: +49-34441-445-20 ■
Dust Suppression
Dear Sir,
We have pleasure to inform you that we are manufacturing speciality
chemicals for various industrial applications. We have Dust
Suppression products range 'DUSTRON' for the DUST SUPPRESSION in
mining operation for haulage road in open cast mines and for the bulk
material handling systems.
We have a Memorandum of understanding (MOU) with Central Mining
Research Institute (CMRI) Dhanbad, India which is a part of Council
of Scientific & Industrial Research Govt. of India. CMRI is the world
recognised Institute for the research in the field of mining
operation.
The following products are approved and accepted by the Indian Mining
Industries since last 10 years for better environmental and mining
conditions.
1. DUSTRON PC Compound: For the open cast mines haul road where the
dust emission is because of HEAVY EARTH MOVERS of high capacity
trucks Dozzer, Tippler etc. DUSTRON PC is used for various class of
mines in India for dust suppression in the mines as under.
(1) Iron Ore Mines
(2) Zinc Mines
(3) Lime Stone Mines
(4) Copper/Chromite Mines
2.DUSTRON PC COAL : For the open cast mines haul road of collieries,
railway sidings and coal jetty's road of the ports.
3.DUSTRON PC LIGNITE : For the haulage roads of lignite open cast mines.
4.DUSTRON XT : This product is used for the dust suppression of bulk
material handling system where at the transfer point crusher house,
dumper platform dust emission is heavy, so along with water spray
DUSTRON XT is used to control dust emission.
5.DUSTRON XT COAL : For bulk material handling system of conveyors,
dumper platform, wagon tipplers of open cast/ under ground mines,
Thermal power plants and coal jetty on the port trust.
All the above products are used in Indian mining industries to control
dust for better environment & working conditions which produce no. of
advantages.
We hope that you might be consuming some product for similar
application. "Using DUSTRON RANGE OF PRODUCT SAVINGS IN WATER is 40%"
with other benefits.
If you find any interest we shall send you the detail literature for
your reference along with quotation.
We request you to send us your e-mail address to contact you on net.
E-mail: nrd@juno.com
We ensure you to provide you best services and technical back-up to
your mines for dust suppression applications.
Awaiting for your valued inquiry.
Thanking you,
Yours faithfully
For N R D Industries
DIPALI SHAH. ■
Rules of thumb
Dear friends,
I have a chain mill that discharge on a belt conveyor, the mill generate too much dust at the feed end of the belt conveyor. I think install a balance duct to minimize the air flow and dust emissions.
Do you know which are the rules of thum or criteria to design a balance duct for dust control?
thanks,
ccervera ■