Red Energy Sdn. Bhd. was established in 1983 and its head office is located at Kota Kemuning, Selangor, Malaysia. The company is primarily involved in the trading and engineering services of various industrial products used in the cement industry, quarries, power plants and other related factories. The products and services can be classified into four categories:
1)Conveyor belts and accessories
2)Open gears and lubrication system
3)Protective linings, castables and refractories
4)Original equipment manufacturers (OEM)
PLANT UPGRADES & PROJECTS
As a local fabricator and distributor/agent of international original equipment manufacturers (OEM), Red Energy was involved in major projects such as:
-FLS-Miljo electrostatic precipitator design, installation and commissioning at Cement Industries of Malaysia (CIMA).
-FLS-Automation DCS system at Langkawi Works Malayan Cement (Lafarge).
-FLS-Automation DCS system at Rawang APMC (Lafarge).
-FLS-Automation kiln scanner, QCX system at Cement Industries of Malaysia (CIMA).
-FLS-Automation revamping of control system at Cement Mill 3 at Cement Industries of Malaysia (CIMA).
-FLS-Automation revamping of control system for whole plant at Tasek Corporation (TASEK).
-FLS-Airtech bag filter and heat exchanger design, installation and commissioning at Rawang APMC (Lafarge).
-LV Technology cement mill and coal mill separator modifications at Cement Industries of Malaysia (CIMA).
-LV-Technology raw mill separator modifications at Kanthan APMC (Lafarge).
-LV-Technology raw mill separator modifications at Tasek Corp (TASEK).
-LV- Technology kiln upgrade at Negri Sembilan Cement Industries (NSCI).
-QS System crushing plant and conveyor-lines design, construction, installation and commissioning at quarry site of Cement Industries of Malaysia (CIMA).
-Re-screening system and conveyor lines at quarry site of Negri Sembilan Cement Industries (NSCI).
-Fabrication and erection works for 10% kiln upgrade at Negri Sembilan Cement Industries (NSCI).
-Fabrication and erection works for raw mill and raw mill cyclone upgrade at Negri Sembilan Cement Industries (NSCI).
-Fabrication and erection works for coal mill upgrade at Negri Sembilan Cement Industries (NSCI).
CONVEYOR BELT SERVICE RECORDS
a)No. 1 Longest conveyor belt in Malaysia Spec: Pipe conveyor NF-1250, Length 4.95km, Width 1100mm
b)2nd & 3rd Longest belt in Malaysia Spec: ST-1250, Length 4.5km, Width 1800mm (2 identical lengths)
c)Longest steel cord belt in coal-fired Power Plant Spec: ST-1000, Length 2.0km, Width 1200mm
And ALL heavy industries in Malaysia like Cement Plants, Power Plants, Ports, Steel Mills, Aggregate Mines, etc.
Conveyor belt splicing in Malaysia
Red Energy has many of the most experienced and highly skilled belt splicing specialists in Malaysia. Our belt splicing specialists have performed splicing and hot vulcanizing jobs on various types of conveyor belts such as Steel Cord Belts, Pipe Conveyor, Heat Resistant Belts, Oil Resistant Belts and many other types of belts, which encompasses various industries as mentioned in the “Conveyor Belt Supply Records” section above.
Other than belt splicing and vulcanizing, our workers also perform other conveyor belt services such as pulley lagging, hot and cold patching, belt dismantling, installation, commissioning and alignment.
LUBRICANT SUPPLY RECORDS
Since the early beginnings of the company, RED ENERGY has recognized the need for specialty lubricants within the country’s various industries. Starting off with the cement industry in mind, the company teamed up with Fuchs Lubritech GmbH (Germany), the world’s largest independent supplier and manufacturer of specialty industrial lubricants, about 15 years ago, to supply the local cement industry with open gear lubricants of the highest quality.
Throughout the years, this alliance has led both companies to be firmly established in Malaysia as a leading supplier of specialty lubricants, especially that for open gears on mills and kilns in the cement industry.
As the years went by, more and more experience was gained and RED ENERGY moved on to become not just a supplier, but solution provider as well. With our skills and knowledge, we are able to provide much needed technical and site services, including gear inspections, lubrication system design, commissioning, maintenance and troubleshooting, among others.
Also, as part of our service package to our customers, we routinely perform service inspections on the equipment using our lubricants, performed every 3 months by qualified experts specially flown in from Fuchs Lubritech Asia Pacific, Australia.
This is done at no extra cost to the client, and is part of our pledge to work closely with our customers to ensure that their machines are constantly maintained at optimum operating conditions.
Together with Fuchs Lubritech, we are currently lubricating no less than 19 mills and kilns across 9 cement plants nationwide, of which 11 machines are installed with our fully-automated Fuchs Lubritech open gear lubrication systems, with more scheduled to be installed in the near future.
REFRACTORY CASTABLE SUPPLY RECORDS
Throughout the years that Red Energy has been in partnership with Calderys Refractory Solutions (formerly Lafarge Refractories, Taiwan), we have been able to provide some of the best products and services to our customers, with regards to heat protection and insulation. This is especially apparent in the cement industry, where our refractory castables are subject to some of the harshest working environments, including the kiln burner pipe, coolers, pre-calciners and kiln nose rings, where temperatures soar past 1200 degrees Celsius and alkali attacks are eminent.
DENSIT WEAR PROTECTION LINING SUPPLY RECORDS
Throughout the years that Red Energy has been in partnership with Densit (Denmark), we have been able to provide some of the best products and services to our customers, with regards to wear protection. This is especially apparent in the cement industry, where our wear protection linings and castables are subject to some of the harshest working environments, including the cooler outlet duct, raw mill duct and cyclones, cement transport piping, etc.
This, coupled with our ability to provide design, consultation and technical backup, has led Red Energy to be the market leader in the industry.
Red Energy Sdn Bhd Malaysia
Red Energy Sdn. Bhd. was established in 1983 and its head office is located at Kota Kemuning, Selangor, Malaysia. The company is primarily involved in the trading and engineering services of various industrial products used in the cement industry, quarries, power plants and other related factories. The products and services can be classified into four categories:
Spec: Pipe conveyor NF-1250, Length 4.95km, Width 1100mm
Spec: ST-1250, Length 4.5km, Width 1800mm (2 identical lengths)
Spec: ST-1000, Length 2.0km, Width 1200mm
■
1)Conveyor belts and accessories
2)Open gears and lubrication system
3)Protective linings, castables and refractories
4)Original equipment manufacturers (OEM)
PLANT UPGRADES & PROJECTS
As a local fabricator and distributor/agent of international original equipment manufacturers (OEM), Red Energy was involved in major projects such as:
-FLS-Miljo electrostatic precipitator design, installation and commissioning at Cement Industries of Malaysia (CIMA).
-FLS-Automation DCS system at Langkawi Works Malayan Cement (Lafarge).
-FLS-Automation DCS system at Rawang APMC (Lafarge).
-FLS-Automation kiln scanner, QCX system at Cement Industries of Malaysia (CIMA).
-FLS-Automation revamping of control system at Cement Mill 3 at Cement Industries of Malaysia (CIMA).
-FLS-Automation revamping of control system for whole plant at Tasek Corporation (TASEK).
-FLS-Airtech bag filter and heat exchanger design, installation and commissioning at Rawang APMC (Lafarge).
-LV Technology cement mill and coal mill separator modifications at Cement Industries of Malaysia (CIMA).
-LV-Technology raw mill separator modifications at Kanthan APMC (Lafarge).
-LV-Technology raw mill separator modifications at Tasek Corp (TASEK).
-LV- Technology kiln upgrade at Negri Sembilan Cement Industries (NSCI).
-QS System crushing plant and conveyor-lines design, construction, installation and commissioning at quarry site of Cement Industries of Malaysia (CIMA).
-Re-screening system and conveyor lines at quarry site of Negri Sembilan Cement Industries (NSCI).
-Fabrication and erection works for 10% kiln upgrade at Negri Sembilan Cement Industries (NSCI).
-Fabrication and erection works for raw mill and raw mill cyclone upgrade at Negri Sembilan Cement Industries (NSCI).
-Fabrication and erection works for coal mill upgrade at Negri Sembilan Cement Industries (NSCI).
CONVEYOR BELT SERVICE RECORDS
a)No. 1 Longest conveyor belt in Malaysia
b)2nd & 3rd Longest belt in Malaysia
c)Longest steel cord belt in coal-fired Power Plant
And ALL heavy industries in Malaysia like Cement Plants, Power Plants, Ports, Steel Mills, Aggregate Mines, etc.
Conveyor belt splicing in Malaysia
Red Energy has many of the most experienced and highly skilled belt splicing specialists in Malaysia. Our belt splicing specialists have performed splicing and hot vulcanizing jobs on various types of conveyor belts such as Steel Cord Belts, Pipe Conveyor, Heat Resistant Belts, Oil Resistant Belts and many other types of belts, which encompasses various industries as mentioned in the “Conveyor Belt Supply Records” section above.
Other than belt splicing and vulcanizing, our workers also perform other conveyor belt services such as pulley lagging, hot and cold patching, belt dismantling, installation, commissioning and alignment.
LUBRICANT SUPPLY RECORDS
Since the early beginnings of the company, RED ENERGY has recognized the need for specialty lubricants within the country’s various industries. Starting off with the cement industry in mind, the company teamed up with Fuchs Lubritech GmbH (Germany), the world’s largest independent supplier and manufacturer of specialty industrial lubricants, about 15 years ago, to supply the local cement industry with open gear lubricants of the highest quality.
Throughout the years, this alliance has led both companies to be firmly established in Malaysia as a leading supplier of specialty lubricants, especially that for open gears on mills and kilns in the cement industry.
As the years went by, more and more experience was gained and RED ENERGY moved on to become not just a supplier, but solution provider as well. With our skills and knowledge, we are able to provide much needed technical and site services, including gear inspections, lubrication system design, commissioning, maintenance and troubleshooting, among others.
Also, as part of our service package to our customers, we routinely perform service inspections on the equipment using our lubricants, performed every 3 months by qualified experts specially flown in from Fuchs Lubritech Asia Pacific, Australia.
This is done at no extra cost to the client, and is part of our pledge to work closely with our customers to ensure that their machines are constantly maintained at optimum operating conditions.
Together with Fuchs Lubritech, we are currently lubricating no less than 19 mills and kilns across 9 cement plants nationwide, of which 11 machines are installed with our fully-automated Fuchs Lubritech open gear lubrication systems, with more scheduled to be installed in the near future.
REFRACTORY CASTABLE SUPPLY RECORDS
Throughout the years that Red Energy has been in partnership with Calderys Refractory Solutions (formerly Lafarge Refractories, Taiwan), we have been able to provide some of the best products and services to our customers, with regards to heat protection and insulation. This is especially apparent in the cement industry, where our refractory castables are subject to some of the harshest working environments, including the kiln burner pipe, coolers, pre-calciners and kiln nose rings, where temperatures soar past 1200 degrees Celsius and alkali attacks are eminent.
DENSIT WEAR PROTECTION LINING SUPPLY RECORDS
Throughout the years that Red Energy has been in partnership with Densit (Denmark), we have been able to provide some of the best products and services to our customers, with regards to wear protection. This is especially apparent in the cement industry, where our wear protection linings and castables are subject to some of the harshest working environments, including the cooler outlet duct, raw mill duct and cyclones, cement transport piping, etc.
This, coupled with our ability to provide design, consultation and technical backup, has led Red Energy to be the market leader in the industry.
For more information, please visit:
https://edir.bulk-online.com/profile...red-energy.htm