Replies
Re: 100 Ton/Hr Wheat Pneumatic Conveying
Posted on
16. Feb. 2021 - 02:40
Sorry Mohammed, but pneumatic conveying is somewhat out of my field, but I am sure that there are plenty suppliers who would be willing to help. ■
Re: 100 Ton/Hr Wheat Pneumatic Conveying
Posted on
7. Jun. 2021 - 04:02
I Have a study on project with the following data, and kindly I need some help on it.
Conveying 100 Ton per Hour of Wheat grains,
by using PD Blower I gonna unload truck of wheat with suction line around 5 meter and discharge in a Ground Storage with include line of 17 Meter.
I have done my calculation and researches but I have some issues i need to take your opinion on it
I am gonna use 10 inch blower with a flow rate of 5000 M^3/hr.
Vacuum DP : 200 mbar
Pressure DP : 250 mbar
Solid Mass load : 22 ( is it Good or high ! )
are my calculation suitable for my application ? if not can you help me with the right one ,
Conveying 100 Ton per Hour of Wheat grains,
by using PD Blower I gonna unload truck of wheat with suction line around 5 meter and discharge in a Ground Storage with include line of 17 Meter.
I have done my calculation and researches but I have some issues i need to take your opinion on it
I am gonna use 10 inch blower with a flow rate of 5000 M^3/hr.
Vacuum DP : 200 mbar
Pressure DP : 250 mbar
Solid Mass load : 22 ( is it Good or high ! )
are my calculation suitable for my application ? if not can you help me with the right one ,
Should have been posted under pneumatic conveying.. ■
100 Ton/hr wheat Pneumatic conveying
I Have a study on project with the following data, and kindly I need some help on it.
Conveying 100 Ton per Hour of Wheat grains,
by using PD Blower I gonna unload truck of wheat with suction line around 5 meter and discharge in a Ground Storage with include line of 17 Meter.
I have done my calculation and researches but I have some issues i need to take your opinion on it
I am gonna use 10 inch blower with a flow rate of 5000 M^3/hr.
Vacuum DP : 200 mbar
Pressure DP : 250 mbar
Solid Mass load : 22 ( is it Good or high ! )
are my calculation suitable for my application ? if not can you help me with the right one , ■