Re: Central Vacuum System
You need to do your research before asking for free engineering services. Here is some reading for you. http://www.gastmfg.com/vphb/vphbs1.pdf ■
Gary Blenkhorn
President - Bulk Handlng Technology Inc.
Email: garyblenkhorn@gmail.com
Linkedin Profile: http://www.linkedin.com/in/gary-blenkhorn-6286954b
Offering Conveyor Design Services, Conveyor Transfer Design Services and SolidWorks Design Services for equipment layouts.
We've Heard This One Before
There are 6 possible inlet conditions and these can be calculated if you know the outlet restrictions and the adequacy of the exhaust airflow.
Manifolding can be considered analogous to electrical factors. Roughly speaking, as usual, main pipes behave as series resistors and branches behave in parallel.
Without any realistic quantification of your system it is impossible to advise: eg. Do you have sufficient exhaust power to extract any air from the farthest inlet when the intermediate inlets are closed? ■
John Gateleyjohngateley@hotmail.comwww.the-credible-bulk.com
Central Vacuum System
I have mentioned the flow as 550 m3/hr and depression 3000mmH2O. Can u give me the calculation sample for pressure drop ■
Central Vacuum System Pressure Drop
Dear sirs,
In this attached drwing i need to calculate the airflow and depression at pick up point.. i will use all three points at a tme. i have attached the performance curve also.. dont consider any material. just want to calculate the air velocity and vacuum at each end points. please giude me with some calculation methode.
Thanks
Attachments
■
Re: Central Vacuum System
Mohan
I moved your latest post to the original one you started. There is no need to start another thread for the same request. I see that you are still looking for free engineering services. I would suggest that you hire a professional that understands vacuum systems. ■
Gary Blenkhorn
President - Bulk Handlng Technology Inc.
Email: garyblenkhorn@gmail.com
Linkedin Profile: http://www.linkedin.com/in/gary-blenkhorn-6286954b
Offering Conveyor Design Services, Conveyor Transfer Design Services and SolidWorks Design Services for equipment layouts.
Central vacuum system
hi I need to use 2 pts at a time... whether the piping is ok or not.... what will be the pressure drop without any material... ■