Gentleman, We can provide you detailed feasibility For Gypsum Calcination and Gypsum Board plant.For 10 m sq. m/year capacity of Gypsum Board plant you should have 4-500 tpd Gypsum Calcination Plant.

We have provided to our services to customers in India,UAE,Saudi,Bahrain and Sudan ect.

Regards, Anil Seth

Libran Engineering&Services

0091-9811055650

www.libranengineering.com ■

Dear

We can be your EPCM partner.

As a qualified and technology-centered company in Korea, we have much experience in bulk material handling systems.

If you have interest, please contus us.

Best rgds,

Jianna Hwang

jianna@htech-fa.co.kr

www.htech-fa.co.kr ■

Dear,

We would like to support you on Dust Collector system and Air Pollution Control.

Please drop us an email or call for further info.

Mob: 84 908 002236

Email: doth@danthermfiltration.com

Best regards,

Thang. ■

Dear Sir,

we are well known copmany in the Gypsum Board industry. We can offer complete plants from rock handling, calcining, mixing, board dryer, take off and stacker; complete with plant controls system. We also help you starting your production. If required we can also offer Gypsum powder plant.

Please let us know your requirements and we can discuss about details. Please reply to hrottmann@gyptech.de

Best regards

Horst

www.gyptech.de ■

Dear son.titan

We are specialists in engineering and supplying equipment for the production of plaster and gypsum-based products. Our company, Grenzebach BSH GmbH, a member of Grenzebach group has been active in the field of gypsum processing for over 70 years. We engineer, manufacture and supply plants for converting natural and chemical gypsum to plaster and for further converting the plaster to wall blocks, compound partition panels, ceiling tiles, plasterboards, fibreboards, etc.

We have been constructing for many years plaster and plasterboard plants for Germany, Europe and also non-European countries. We not only supply to our customers the machinery which we design in our offices and manufacture in our own workshops, but also the complete technological know-how.

Our company has a large engineering and design department with experienced engineers to rely on. These engineers are familiar with the production plants and the products. Some of these engineers have even been in charge of running production facilities.

We also have completely equipped laboratories and a testing facility with experienced chemists, physicists and process engineers for material testing, i.e. for testing the raw material, additives and plaster. Different pilot plants are available to run tests on an industrial scale.

Our own field installation service has a large number of qualified staff and specialists to erect the plants we supply.

We have a special commissioning team for putting the plants into operation. This team is assisted, whenever necessary, by our engineering and design department. Moreover, the design engineer in charge of the project will also assist with the installation of the plant on site.

For inspecting and servicing the plants after they have gone into operation, for providing training to plant operators either at our offices or on site at the plant supplied by us, i.e. during or after commissioning, Grenzebach BSH has a number of experienced and well-trained people capable of handing all these tasks.

If you can let us have your e-mail or postal address, we shall be glad to send you our brochure with further information. You may also wish to visit us on the internet at www.grenzebach.com.

In the next step we would then send you more detailed questionnaires to obtain further data that will be the basis for a proposal tailored to your specific requirements.

Please feel free to contact us for any additional information that you may require.

We shall be glad to assist you in implementing your projects and look forward to hearing from you again.

Yours sincerely

GRENZEBACH BSH GMBH

Please contact:

Franz-Gerhard Eckardt

Head of Sales Building Materials Technology

Grenzebach BSH GmbH

Rudolf-Grenzebach-Straße 1

36251 Bad Hersfeld, Germany

Mobile +49 (0) 160 972 04 333

Tel. +49 (0) 6621 - 81 3431

Fax +49 (0) 6621 - 81 3495

e-mail: Franz.Eckardt@grenzebach.com

please visit us at: www.grenzebach.com ■

Originally Posted by son.titan

A new gypsum board in Vietnam with 10 mill sp mpy seeking for EPCM partners.

Dear Sir,

CNBM is the largest manufacturer of gypsum board and gypsum equipment in China with annual production capacity more than 1 billion sqm.

We could provide all related service and technology and equipment for your project.

Pls give me your contact information to reach you directly for more details.

Royee Han

China National Building Materials(Group)Corp.

Bldg No.4,Interwest center,No.9,Shouti South Road,Haidian District.Beijing 100044,China

Tel86-10)6879-6954

Fax86-10)6801-5525

Mob: 86-158-01061870

Email: Royee@cnbmtechnology.com

MSN: royeehan@hotmail.com

Yahoo: royeehan@yahoo.com

Skype: royeehan ■

Dear sirs,

I want to know more details of new project called new gypsum plant in Vietnam,

How to know it ??.

B.rgds.

Supoj ■

We have done an assignment for KNAUF Gypsum Storage and Handling.

Please contact us:

T. Prabhat Kumar

Sr. Marketing Manager

LB-Turbovent, Hyderabad, India

+91 76808 27222

prabhat.kumar@lb-technology.com

tpk@turbovent.com

LB Officine Meccaniche SpA

Italy

www.lb-technology.com

www.turbovent.com ■