Replies
Jaw Crusher Common Troubleshooting Methods
Posted on
17. Apr. 2013 - 11:41
Adjust seat off -
1) adjust the seat and replace the assembly replace the original OEM bracket, bracket pad
2) and replacement adjust the seat to adjust seat bolt adapter
3) adjust the seat replacement
Eccentric shaft bent or broken-
1) Replace the eccentric shaft, correct lifting host
2) replacement of the eccentric shaft, the compressive strength of the material by crushing, select suitable crusher
3) Replace the eccentric shaft, align the work load or change to adapt to the crusher
4) Replace the eccentric shaft, do not use does not match the design standards of the bracket, bracket pad
5) Replace the eccentric shaft, eccentric shaft with heat qualified
high quality Jaw Couplings which are resistant to oil, grease and many solvents are good ■
Troubleshooting Jaw Crushers
Common trouble and trouble shooting of Jaw crushers
Malfunction:
Crushing job stops while wheels runing,and jaw plats are off the groove.
Main Cause:
1Spring is damaged
2Drag bar damaged
3Drag bar nut loose
Solution:
1 Change spring
2 Change drag bar
3 Tighten the nut
Malfunction:
Swing jaw beats
Main Cause:
Jaw plate tighten- parts loose
Solution:
Tighten block nut
Malfunction:
Fixed jaw beats
Main Cause:
Jaw plate tighten- parts loose
Solution:
Tighten block nut
Malfunction:
Bearing is over heat
Main Cause:
1Shortage of lubricant
2Lubricant is corrupted
3Bearing damaded
Solution:
1 Add lubricant
2 Change lubricant
3 Change bearing
Malfunction:
Strenge sound in the backside
Main Cause:
Drag bar loose,blow bar hit swing jaw and liner plate mat
Solution:
Tighten drag rod nut
Malfunction:
Spring damage
Main Cause:
Turn down output-mouth without loosing spring
Solution:
Tighten drag bar nut after adjustment
For more information, please visit:
https://edir.bulk-online.com/profile...y-industry.htm
http://www.google.com/search?client=...UTF-8&oe=UTF-8 ■