Atomized 45% Ferrosilicon Powder In China
China atomized 45% ferrosilicon powder is very popular among customers all over the world, mainly because of its high quality and cost performance. Usually, many ferrosilicon powder manufacturers will use lumps ferrosilicon with 45% silicon content as the raw material for processing atomized 45% ferrosilicon powder, in terms of mesh size, according to customers’ requirements.
Application
1. Applied to the raw material of welding flux, it can effectively improve the deoxidation performance of welding rod and reduce the influence of oxygen on the welding effect in welding.
2. As a good deoxidizing material in steel making, it can greatly reduce the deoxidizing time and improve the deoxidizing effect, and the process of deoxidizing is very stable, which can greatly improve the safety of staff work.
3. The basic raw material of silicone.
4. Can be used in the production of high temperature resistant materials, such as the production of enamel, ceramic products, high purity silicon wafers production process.
5. Widely used in mineral screening ■
Re: Needed: Ferrosilicon 15
China atomized 45% ferrosilicon powder is very popular among customers all over the world, mainly because of its high quality and cost performance. Usually, many ferrosilicon powder manufacturers will use lumps ferrosilicon with 45% silicon content as the raw material for processing atomized 45% ferrosilicon powder, in terms of mesh size, according to customers’ requirements.
Application
1. Applied to the raw material of welding flux, it can effectively improve the deoxidation performance of welding rods and reduce the influence of oxygen on the welding effect in welding.
2. As a good deoxidizing material in steel making, it can greatly reduce the deoxidizing time and improve the deoxidizing effect, and the process of deoxidizing is very stable, which can greatly improve the safety of staff work.
3. The basic raw material of silicone.
4. Can be used in the production of high-temperature resistant materials, such as the production of enamel, ceramic products, high purity silicon wafers production process.
5. Widely used in mineral screening ■
Re: Needed: Ferrosilicon 15
China atomized 45% ferrosilicon powder is very popular among customers all over the world, mainly because of its high quality and cost performance. Usually, many ferrosilicon powder manufacturers will use lumps ferrosilicon with 45% silicon content as the raw material for processing atomized 45% ferrosilicon powder, in terms of mesh size, according to customers’ requirements.
Application
1. Applied to the raw material of welding flux, it can effectively improve the deoxidation performance of welding rods and reduce the influence of oxygen on the welding effect in welding.
2. As a good deoxidizing material in steel making, it can greatly reduce the deoxidizing time and improve the deoxidizing effect, and the process of deoxidizing is very stable, which can greatly improve the safety of staff work.
3. The basic raw material of silicone.
4. Can be used in the production of high-temperature resistant materials, such as the production of enamel, ceramic products, high purity silicon wafers production process.
5. Widely used in mineral screening ■
Needed: Ferrosilicon 15
Dear Sirs:
WE ARE LOOKING FOR INFORMATION (SUPPLIERS) ABOUT FERROSILICON 15 TO USE IN A SINK&FLOAT PLANT (HEAVY MEDIUM PLANT). WE NEED TO BUY SOME QUANTITY OF THIS MATERIAL (4/6 TNS) TO USE IN OUR PLANT IN ARGENTINA.
I ENCLOSE THE TWO DIFFERENT SPECIFICATION OF THIS MATERIAL (THE DIFFERENCE IS THE GRANULOMETRY) THAT WE CAN USE.
FERROSILICON 15 - 270D
Production Method: milled
Grade 270D
Silicon: 14 a 16%
No Magnetic material: 0,75% maximum
Specific weight: 6,70 a 6,95 gr/cm3
Granulometric Analysis:
+ 200# 0,2 %
+ 325# 10 %
- 325 # 90 %
FERROSILICON 15 – 150D
Production Method: milled
Grade: 150D
Silicn: 14 a 16%
No Magnetic material: 0,75% maximum
Specific weight: 6,70 a 6,95 gr/cm3
Granulometric Analysis:
+ 150# 0,5 %
+ 200# 2,0 %
+ 325# 25 %
- 325 # between 70 y 80 %
WE PREFER TO HAVE INFORMATION OF WESTERN COMPANIES (SUPPLIERS), NOT FROM CHINA.
Best regards
Ing. PABLO D. MATOCQ
Electrometalrgica Andina S.A.I.C.
pdm@eandina.com
Te: 0054-264-4263504
Fax: 0054-264-4263501 ■