Re: Dry Cement Transfer Technology
Dear Apoorva Vyas,
From your description, I understand that you have an existing pneumatic conveying system for cement.
This existing system is using a 4 bar compressor as air supply.
For some reason, you want to replace or modify this system for a blower system or a complete different system.
I have a feeling that the compressor broke down and that a new (screw) compressor is considered too expensive and that a blower (lower pressure) is cheaper.
Search this forum and the internet for “pneumatic conveying company”.
Asking for a “technical catalog”, based on such a vague description and even asking for a “budget” is too optimistic.
You will probably better response, when you open a thread in the “Pneumatic conveying” section in this forum.
Give a technical description of the existing installation and the reason why you want to change it and what the requirements of the new installation are.
Success
Teus ■
Teus
Cotact Scorpio Engineering For Cement Transfer, Info@Scorpioeng…
Dear mr.Apoorva
You may send your enquiry for the cement transfer solution
Contact detaisl : infor@scorpioengg.com
thanks
Jacob
Dear Sir/Mam,
We have a requirement of some technology to transfer the dry cement in our Zinc lead plant (Mill) for filling the underground Zinc mines at Rajpura Dariba Mines, Rajsamand, Rajasthan, India. Our existing system is the cement is transfered from 25 Tonne closed tank with 4 Kg/cm2 pressure (by compressor) through air dryer unit to the tank of 25 meter height and capacity of 230 m3. After that it is again transferred in the same way as previous but to the tank of 80 metric tonne.
Now we want to do this process by blower or some other technology. So kindly send me a technical catalog and budget as soon as possible.
Thanks and regards
Apoorva Vyas
GET
Mill Instrumentation
Hindustan Zinc Limited
Rajpura Dariba Mines
■
Cotact Scorpio Engineering For Cement Transfer
Dear Apoorva,
Pelase send us your enquiry to info@scorpioengg.com for the cemnet transfer solution.
Thanks
Jacob.P ■
Dry Cement Transfer Technology
Dry cement transfer technology
Dear Sir/Mam,
We have a requirement of some technology to transfer the dry cement in our Zinc lead plant (Mill) for filling the underground Zinc mines at Rajpura Dariba Mines, Rajsamand, Rajasthan, India. Our existing system is the cement is transfered from 25 Tonne closed tank with 4 Kg/cm2 pressure (by compressor) through air dryer unit to the tank of 25 meter height and capacity of 230 m3. After that it is again transferred in the same way as previous but to the tank of 80 metric tonne.
Now we want to do this process by blower or some other technology. So kindly send me a technical catalog and budget as soon as possible.
Thanks and regards
Apoorva Vyas
GET
Mill Instrumentation
Hindustan Zinc Limited
Rajpura Dariba Mines ■