Briquetting
Dear Sir,
the issue you encounter may derive from very different root causes:
- moisture content, particle mix
- particle size
- particle surface / originating process
- briquetting pressure
- pocket design / slope angles, suface ...
etc.
To cut a long story short, imo the best solution would be if you engage with a reputable supplier of briquetting machinery and ask the / your questions or else receive a relevant set of questions to your intended process thsat may help you forward.
Kind regards
R.
Just for an example, and w/o any link of mine to this enterprise: http://www.koeppern-international.com/ ■
Re: Problem With Ball Press Roller Briquette Machine
Pocket roll briquetting was always a problem for us in the salt industry and for that reason we switched to corrugated rolls and the problems as you describe went away.
I am not saying that would be your solution and as Rowland says it is best to consult with the OEM for the best advice. ■
Gary Blenkhorn
President - Bulk Handlng Technology Inc.
Email: garyblenkhorn@gmail.com
Linkedin Profile: http://www.linkedin.com/in/gary-blenkhorn-6286954b
Offering Conveyor Design Services, Conveyor Transfer Design Services and SolidWorks Design Services for equipment layouts.
Hi Dear Nima, I Am Hadi From Iran
We have a Ball press roller briquette machine and we want to make briquettes of Lime and bauxite. the problem is that when we start the machine after a while the pockets (roller cells) are blocked tightly with material and they the material should be removed off pockets with a lot of force. We did send rollers to plating and coating , used gasoline and oil for lubricating but it did no help. Can anyone suggest what could solve the problem?
I am working in hbi ( hot briquetting iron) plant in iran , we had more problems with our machines and we solved one by one , you can send massage in whatsapp to me and i will help you , ■
Re: Problem With Ball Press Roller Briquette Machine
hadinekahi
This forum does not operate that way. Please explain your problems and solutions on here. The answers may help others with similar problems. Nima19864 posted this 2 1/2 years ago. I would hope his problem has been solved by now.
Not everyone uses whatsapp. I would not be sure that it is even safe to contact someone that way. Therefore I have removed your whatsapp contact info. ■
Gary Blenkhorn
President - Bulk Handlng Technology Inc.
Email: garyblenkhorn@gmail.com
Linkedin Profile: http://www.linkedin.com/in/gary-blenkhorn-6286954b
Offering Conveyor Design Services, Conveyor Transfer Design Services and SolidWorks Design Services for equipment layouts.
Problem with Ball press roller briquette machine
Dear Sirs
We have a Ball press roller briquette machine and we want to make briquettes of Lime and bauxite. the problem is that when we start the machine after a while the pockets (roller cells) are blocked tightly with material and they the material should be removed off pockets with a lot of force. We did send rollers to plating and coating , used gasoline and oil for lubricating but it did no help. Can anyone suggest what could solve the problem? ■