Replies
Re: C60n
Posted on
26. Dec. 2009 - 01:04
Here are references to C60 as a start ---
http://www.matbase.com/material/ferr...c60/properties
http://www.znksteel.com/supplier/man...ndard/C60.html ■
Re: C60n
Posted on
26. Dec. 2009 - 02:27
Here are references to C60 as a start ---
http://www.matbase.com/material/ferr...c60/properties
http://www.znksteel.com/supplier/man...ndard/C60.html
http://www.matbase.com/material/ferr...c60/properties
http://www.znksteel.com/supplier/man...ndard/C60.html
Hei,
Thanks buddy, this is all I need. ■
C60n
Hi,
Any of you guys know what material C60N exactly is?
I want to modify my rigid coupling which connects my Gearbox LSS to the conveyor pulley. This modification will include drilling & machining on the ID which will reduce wall thickness down to 50% from its original thickness. I need to know what is the exact yield point value of this material.
Otherwise I cannot judge if the hub is still strong enough to withstand whatever stress on it after the modification.
Any advise? ■