Replies
Re: Trow Factor Of Vibrating Conveyors And Rosta Swingarms
Posted on
6. Jul. 2005 - 04:15
Have you considered using a horizontal motion tray conveyor for this application, how fast are you trying to move the product (metre/min ), Rather than bouncing it along it would slide on the tray.
Paul Tamlin ■
Trow factor of vibrating conveyors and Rosta swingarms
Dear all,
a vibrating conveyor for frozen meat has to be designed. They asked me to design an vibrating conveyor with a frequency of 20 Hz and 10mm stroke.
The throw factor = max.VERTICAL through acceleration / gravitational acceleration
If I use Rosta swingarms the maximal through accelaration (not the vertical through acceleration) has to be below 1.7g. This means 20 Hz driving frequency is to high.
The maximum is 12Hz and stroke=6mm
Sow this mean the throwfactor is below 1.
Does this mean the material does not move?
Harm van der Pol
Student Fontys University Eindhoven (Netherlands) ■