Steel pipes required Posted in: Forums » News from the Industry » New Projects, Tenders, Inquiries , on 21. Feb. 2007 - 15:46 Dear Sirs,One of our clients intends to procure following goods. You are requested to giveus your lowest rates on FOB basis by adding 2% for SLI.Enquiry No. SLI-6054=====================Seamless Boiler Pipes (22 Sizes) As Per Detail Given Below(Due date 26-02-2007)S. No.DescriptionQtyUnitMtrUnit PriceTotal Price Material: A 106 GR. B=========================================================1.S/L Pipe O.D 21.3 X 2.77 X 6000162.S/L Pipe O.D 33.4 X 3.38 X 60009543.S/L Pipe O.D 33.4 X 4.55 X 6000164.S/L Pipe O.D 38.1 X 3.2 X 6000201205.S/L Pipe O.D 38 X 3.5 X 12000303606.S/L Pipe O.D 48.3 X 3.68 X 60005307.S/L Pipe O.D 48.3 X 5.08 X 6000168.S/L Pipe O.D 57 X 3.2 X 68001359189.S/L Pipe O.D 57 X 4 X 80007862410.S/L Pipe O.D 57 X 4 X 85002420411.S/L Pipe O.D 57 X 4 X 105008488212.S/L Pipe O.D 57 X 4.5 X 85003227213.S/L Pipe O.D 60.32 X 3.91 X 60003018014.S/L Pipe O.D 60.32 X 5.54 X 60001615.S/L Pipe O.D 88.9 X 5.49 X 60001616.S/L Pipe O.D 114.3 X 6.02 X 600053017.S/L Pipe O.D 168 X 11 X 60001618.S/L Pipe O.D 219.1 X 8.1 X 600042419.S/L Pipe O.D 219.1 X 12.7 X 600053020.S/L Pipe O.D 244 X 25 X 500031521.S/L Pipe O.D 457 X 14.3 X 250012.5MATERIAL: A 209 GR. T1============================22. S/L Pipe O.D 38 X 3.5 X 100006262023.S/L Pipe O.D 38 X 3.5 X 105003233624.S/L Pipe O.D 219.1 X 12.7 X 600016Notes:1.MTC should be provided alongwith third party inspection according to EN10204/3.1.C or 3.22.General requirement as per ASTM A 530/530M & A 1016/ 1016M (for A 209 GRT1)3.The outside of pipes must be protected against rust and must be capped atboth ends with plastic caps.4.The tubes should be tested hydrostatically as per applicable standards.5.Material, Size, Heat No & Purchase order No. should be hard stamped/markedon each piece at both ends.6.The tubes should be properly packed to avoid damages duringtransportation/handling at KPT & transported through open top container.7.Country of origin European or Japan.8.End Use. 30 TON/HR Boilers.Note: The suppliers should categorically confirm our technical requirement bymentioning “YES” or “NO” against Sr. No. 1 to 7.Best Regards,Abdul Rauf AwanC. E. O.Silver Lining International(SLI)Office # 01, Post Office Market,Sher Shah Suri Road Taxila PakistanTele: 0092-51-4325035,Fax: 0092-51-4543710Email: slipk@gawab.comgmslipk@yahoo.comSkype addr. sli2006 ■ Transport
Steel pipes required
Dear Sirs,
One of our clients intends to procure following goods. You are requested to give
us your lowest rates on FOB basis by adding 2% for SLI.
Enquiry No. SLI-6054
=====================
Seamless Boiler Pipes (22 Sizes) As Per Detail Given Below
(Due date 26-02-2007)
S. No.DescriptionQtyUnitMtrUnit Price
Total Price
Material: A 106 GR. B
==============================================
===========
1.S/L Pipe O.D 21.3 X 2.77 X 600016
2.S/L Pipe O.D 33.4 X 3.38 X 6000954
3.S/L Pipe O.D 33.4 X 4.55 X 600016
4.S/L Pipe O.D 38.1 X 3.2 X 600020120
5.S/L Pipe O.D 38 X 3.5 X 1200030360
6.S/L Pipe O.D 48.3 X 3.68 X 6000530
7.S/L Pipe O.D 48.3 X 5.08 X 600016
8.S/L Pipe O.D 57 X 3.2 X 6800135918
9.S/L Pipe O.D 57 X 4 X 800078624
10.S/L Pipe O.D 57 X 4 X 850024204
11.S/L Pipe O.D 57 X 4 X 1050084882
12.S/L Pipe O.D 57 X 4.5 X 850032272
13.S/L Pipe O.D 60.32 X 3.91 X 600030180
14.S/L Pipe O.D 60.32 X 5.54 X 600016
15.S/L Pipe O.D 88.9 X 5.49 X 600016
16.S/L Pipe O.D 114.3 X 6.02 X 6000530
17.S/L Pipe O.D 168 X 11 X 600016
18.S/L Pipe O.D 219.1 X 8.1 X 6000424
19.S/L Pipe O.D 219.1 X 12.7 X 6000530
20.S/L Pipe O.D 244 X 25 X 5000315
21.S/L Pipe O.D 457 X 14.3 X 250012.5
MATERIAL: A 209 GR. T1
============================
22. S/L Pipe O.D 38 X 3.5 X 1000062620
23.S/L Pipe O.D 38 X 3.5 X 1050032336
24.S/L Pipe O.D 219.1 X 12.7 X 600016
Notes:
1.MTC should be provided alongwith third party inspection according to EN
10204/3.1.C or 3.2
2.General requirement as per ASTM A 530/530M & A 1016/ 1016M (for A 209 GR
T1)
3.The outside of pipes must be protected against rust and must be capped at
both ends with plastic caps.
4.The tubes should be tested hydrostatically as per applicable standards.
5.Material, Size, Heat No & Purchase order No. should be hard stamped/marked
on each piece at both ends.
6.The tubes should be properly packed to avoid damages during
transportation/handling at KPT & transported through open top container.
7.Country of origin European or Japan.
8.End Use. 30 TON/HR Boilers.
Note: The suppliers should categorically confirm our technical requirement by
mentioning “YES” or “NO” against Sr. No. 1 to 7.
Best Regards,
Abdul Rauf Awan
C. E. O.
Silver Lining International(SLI)
Office # 01, Post Office Market,
Sher Shah Suri Road Taxila Pakistan
Tele: 0092-51-4325035,
Fax: 0092-51-4543710
Email: slipk@gawab.com
gmslipk@yahoo.com
Skype addr. sli2006 ■