Re: Shipunloading Dust Control
The dust control system for ship unloading operation is very much affiliated with ship unloading system / mechanism.
I would suggest you to contact the manufacturers of the Ship Unloader who will be in the best position to offer the system or suggest the supplier of dust control systems, who will have the necessary experience for such specific cases.
Regards,
Ishwar G Mulani.
Author of Book : Engineering Science and Application Design for Belt Conveyor.
Email : parimul@pn2.vsnl.net.in
Tel.: 0091 (0)20 5882916 ■
Re: Shipunloading Dust Control
I agree with Mr. Mulani. The first two areas of concern are probably best handled by them.
As far as the belt conveyor transfer points go, you could utilize small "insertable" pulse jet dust collectors for those areas of concern. They are available from various dust collector manufacturers. ■
Burnley Baffles For Dust Suppression
McGill AirClean Corporation provides dust suppression systems for effective dust control for facilities that handle grain, fertilizer, cement, lime, coal, crushed rock, powders, and chemicals.
We offer Burnley Baffles for controlling fugitive dust from loading and unloading operations, including shipping docks. Our Burnley Baffles are gravity-operated devices consisting of pivotally mounted baffles and fixed metal deflectors.
A detailed brochure is attached and also available for download from www.mcgillairclean.com. A videotape demonstration of the Burnley Baffles operating at a ship unloading dock is available on request.
For immediate assistance to determine your needed dust suppressio configuration and/or to request a quotation, please contact Mr. Dave Luttenberger at 614/542-2427. Email: service@mcgillairclean.com. Address: McGill AirClean Corporation, 1779 Refugee Road, Columbus, Ohio 43207-2119, USA. ■
Untitled
I suggest you to consult to:
NEUERO
Contact: Mr. Andreas HIDENBURG
Phone: 00 49 542295030
e-mail: neuero@neuero.de
More information: http://www.neuero.de ■
Re: Shipunloading Dust Control
We ask you to contact us, because we have a lot of experiences in dedusting filters for ship unloading terminals, special in the dedusting of phosphate rock ship unloading stations in ports of Syria and Jordan.
Please contact:
SCHEUCH GmbH
Mr. Josef Reisinger
Phone: 00 43 7752 905 124
Fax: 00 43 7752 905 375
E-Mail: j.reisinger@scheuch.com
http://www.scheuch.com ■
Re: Shipunloading Dust Control
Our Principals, M/s Dustven Private Ltd can do the job. ■
Re: Shipunloading Dust Control
Conveyor Dynamics, Inc. (CDI) offers dust control for belt conveyor transfer stations. See: www.conveyor-dynamics.com
Other forms of dust generation may also be controlled by the science/engineering solutions we offer.
Discrete Element Method (DEM) simulation modeling of granular flow with gas can produce the best available transfer chute geometry that can achieve twelve major benefits and control of:
1. Dust emissions
2. Belt wear
3. Belt puntures, tears,.....
4. Noise
5. Liner wear
6. Product degradation
7. Impact station idler life
8. Belt spillage
9. Chute pluggage
10. Belt tracking by load centering
11. Power saving
12. Increased belt capacity
Hoping to hear from you.
Lawrence Nordell
Conveyor Dynamics, Inc. USA
nordell@conveyor-dynamics.com
ph: 360-671-2200
fx: 360-671-8450 ■
Reverse Pulsejet Dust Collectors
Dear Samllanos:
Scientific Dust Collectors (www.scidustcollectors.com) has extensive experience in this type of application with companies such as Lafarge. Please refer to website and feel free to contact me directly for more information.
Best regards,
Steve Coffee
scoffee@scientificdust.com ■
Re: Shipunloading Dust Control
Camfil-Farr offers a comprehensive range of dust abatement equipment to suit various Air Pollution Control applications.
Please visit the Air Polution Control section on our web site for more information (http://www.camfil.com) or contact me direct.
John B. Purvis
Camfil Farr Ltd, UK
E-Mail: john.purvis@camfil.co.uk ■
Dust Control - Analysis And Equipment
Dear Samllanos,
As it comes to dust control and material flow we have a great deal of experiance in a wide range of material and analysis. We do offer full Chute Analysis based on Discrete Element Methods (DEM) with a wide range of dust control systems. Visit our site at www.overlandconveyor.com or www.applieddem.com. We have been involved in minning and aggregate now for many years and have done numerous analysis on transfer points dealing with dust and dust minimazation and prevantion.
We can optimize the dust and material flow to reduce a number of problems which you might have.
Also if you would like to find out more and get a number of refrences we will be more than happy to provide you with them.
best regards,
Grzegorz Dewicki
dewicki@overlandconveyor.com
303.716.0569 ■
Dust Controll
The last two points can be solved with simple installations.
We suggest intake pit filters for the hopper and spotfilters for the belt conveyor discharge points.
Please contact
Jansen & Heuning Bulk Handling Systems
Groningen
The Netherlands
tel: +31 50 3126 448
e-mail: info@jh.nl
web: www.jh.nl ■
Dust Control
Benetech GmbH offers dust suppression products for diverse applications. Please consult
www.benetechusa.com
for further information.
Best regards,
Benetech GmbH
benetech@gmx.de
Karl Liebknecht Str. 27
D-06682 Deuben, Germany ■
Re: Shipunloading Dust Control
Dear Samllanos,
The first two dust problem areas (windblown hold dust and clamshell transfer dust) can be eliminated by using a self-unloader ship to transport the phosphate. These ships use conveyors under the holds to empty the vessel. The boom conveyor on the spar deck is normally covered, or can be covered to contain dust to the receiving hopper. Dusting at that point can be contained by a simple curtain.
As far as the various conveyor transfer points are concerned, there are a number of straight forward dust containment solutions. Try contacting companies, such as Martin Engineering, for a suitable answer.
Hope this helps. ■
Re: Shipunloading Dust Control
Dear Mr. Samllanos,
We are producer for dust collectors as WAm Spa Italy. And, have experienced similar aplication for various powders.
Could you please so kind as to supply us with necessary data such as ;
- capacity,
- size of material & granulation
- mobile hopper size & shape & other physical details
- belt conveyor dimensions and capacity
- way of agitating the material from ship
- the existing emission and target emission.
Then we shall work on to form a solution.
Thanks & Best Regards
Mustafa Sen
Ozbekoglu Ltd Sti
ozbekoglu@ozbekoglu.com ■
Re: Shipunloading Dust Control
We can send you details and drawing of our mobile dedusting hoppers that eliminate the dust generated during the grab unloading operation.
Please send us your e mail address.
Best regards
Velan
scorpioengg@vsnl.com
www.scorpioengg.com ■
Dust Collection Equipment
ASTEC manufactures pulse jet baghouses, draft systems and other dust collection equipment for various industries including; aggregate & mining, asphalt, incineration and remediation, and recycling. We also build these collectors to service scavange points from conveyor belts, transfer points, vibrating screens and material storage bins.
Please visit our website; www.astecinc.com, and/or contact us at (423) 867-4210. ■
Re: Shipunloading Dust Control
With the numerous problems associated with ship unloading process, your most effective option would be to have the cargo receive a residual dust suppression application during or just prior to ship loading.
I have successuflly accomplished similar fugitive dust management results on coal loaded in US destined for Spain. Dust was controlled at both loading and unloading.
My services are as an independent Dust Management Consultant with 25+ years hands on, practical application engineering expetise.
Feel free to contact me at sbsdust@att.net. ■
Shipunloading Dust Control
Dear Samllanos,
we are producer of a dust control system which (besides a lot of other applictions) is installed and in operation in Austria with phosphate. It is operating after a beltconveyor transfer point. The system is operating like an electronic filter, has very low power consumption, low maintenance and no wear.
For more information. Please contact me directly.
Best regards
Thomas.Ossevorth
Thomas.Ossevorth@sandvik.com ■
Dust Suppression For Conveyor Belt Transfers
Dear Samllanos,
we are an expanding mechanical engineering firm, primarily working in the bulk material industry. Our products are specially designed for the Silo and Conveying technologies, as well as for turnkey systems in the bulk materials industry. Our experience in the area of dedusting of bulk materials, particularly by conveyor belt transfer points, is extensive based upon our developing of safe and cost efficient solutions for each customer.
For more information, please contact
B+W GmbH
Musfeldstr. 120-122
D-47053 Duisburg
Germany
Tel: +49-203-55 21 500
email: info@buwip.de
web: www.buwip.de ■
Dustless Unloader
Our company applies the high-density material conveying system and flying ash convey and process system in China and Taiwan.
We looking for the company which sells or manufatures "dustless unloader" in USA, please mail me as soon as possible if you any informations about this and your help will be highly appreciated.
Best regards
Jersey Wu
Hwa Jann Enterprise Co., Ltd
Add: 8F, no.80, Sec.1, kuang fu road, san-chung city,
taipei county, Taiwan, R.O.C
Fax: 886-02-8512-3421
http://www.hecg.com.tw
mail: hikaru@hceg.com.tw ■
Untitled
Dear Ellanos,
please have a look to our website
www.vsr-industrietechnik.de
Our Dust suppression device will be delivered worlwide, also for
shipunloaders.
Especially at this moment we collect the needed parts for an
international order.
Please contact me directly
email:schlabach@vsr-industrietechnik.de
Thanks in advance
W.Schlabach ■
Re: Shipunloading Dust Control
Dear sir,
We have handled your request to Torex head office in Italy to. Contact you through USA.
Best Regards
Ozbekoglu
Mustafa Sen
tel: +90 312 472 04 04
fax: +90 312 472 09 30
www.wamgroup.com
www.ozbekoglu.com
ozbekoglu@ozbekoglu.com ■
Dust Management
Benetech has extensive experience in dust management for mines, quarries, power plants, ship unloading facilities.
To find more information , you may consult the website www.benetechusa.com.
The Benetech Engineering departments will be pleased to help you in finding a solution for your dust problem.
Best regards,
Benetech GmbH
Karl Liebknecht Str. 27
D-06682 Deuben near Leipzig
Germany
Email: benetech@gmx.de
Tel: +49-34441-445-0
Fax: +49-34441-445-20 ■
Re: Shipunloading Dust Control
Roncuzzi Industrial service have been installed more than 12 mobile dedusted hoppers from 3x3mt upt t o10x10mt wide, for coal, cement, klinker, caoilin, vegetable, flour, gips, slags etc.....
In all of them we have used WAM filters to clean the air from dust and particulate with excellent results.
Other solutions are linked to an accurate analysis of where and how, for each type of material used inside the hopper, will be generate the dust.
Litterature available on selected requests.
Saccaggi Francesco ■
Ship/Barge Loading/Unloading - Dust Suppression
DSH Systems dust suppression hoppers are now being installed for ship and barge loading of dry, granular, free-running materials - sometimes as a stand-alone installation and on other sites as an add-on to more traditional loading spouts.
The standard DSH System uses no utilities so installation is quick and easy and and it has no internal moving parts therefore product degradation is reduced. At the point of loading, or transferral, the DSH System concentrates the discharge of dry goods as a tight solid column through free air into any target repository. A small degree of natural agitation as the hopper is filled excludes air from the material being transferred.
For more information please contact ian@dshsystems.com
Best regards,
Judi Schwass
DSH Systems Ltd
www.dshsystems.com
Ian Walton CEO - Phone +64 275 999 592 ■
Untitled
Originally Posted by DSHSystems
The standard DSH System uses no utilities so installation is quick and easy and and it has no internal moving parts therefore product degradation is reduced. At the point of loading, or transferral, the DSH System concentrates the discharge of dry goods as a tight solid column through free air into any target repository. A small degree of natural agitation as the hopper is filled excludes air from the material being transferred.
For more information please contact ian@dshsystems.com
Best regards,
Judi Schwass
DSH Systems Ltd
www.dshsystems.com
Ian Walton CEO - Phone +64 275 999 592
Hi Judi,
Impressive as your spout appears to be, the original thread was started in relation to ship unloading, which seems unsuitable for your spout which describes ship loading.
Gary B might intercede and advise us both that the thread is decade-spent but here we are anyway. Good luck. Is there a technical note in the offing? ■
John Gateley johngateley@hotmail.com www.the-credible-bulk.com
Shipunloading dust control
Dear friends:
Our company needs a system to control dust generated during phosphate rock shipunloading. Major dust emission points are: (1) windblown dust at ship´s holds (2) clamshells discharge onto mobile hoppers (3) belt conveyor transfer points.
Please advise what companies could be interested in offering dust abatement technology for this aplication.
Thanks in advance,
Samllanos ■