One Martin Place
Neponset, IL 61345
USA |
| Tel. | + 1 309-852-2384 | | Tollfree: | + 1 800-544-2947 | | Fax: | + 1 800-814-1553 |
Mail to: Martin Engineering USA
http://www.martin-eng.com
Contact Persons:
Ms. Kari Maes
Marketing
Mail to: Ms. Kari Maes
Company Presentation:
Martin Engineering makes bulk materials handling cleaner, safer and more productive, with engineered systems including conveyor belt cleaners, conveyor load zone / transfer point chutes, impact cradles and slider beds, skirtboard sealing systems, air-supported belt conveyors, air cannons, pneumatic ( air ) and electric industrial / bin / railcar /truck vibrators, belt training/alignment devices, dust suppression/collection/control systems, and specialized contract services including installation / maintenance and silo / bin / bunker cleaning.
PRODUCTS
• Belt Cleaners / Accessories
Martin Engineering is the world’s leading developer and manufacturer of engineered belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for cleaner engineering and performance.
Generally, this philosophy calls for belt cleaners that are:
As far forward (as close to the conveyor discharge) as possible.
Positioned out of the material flow.
Designed to minimize risk to belt, splice, and cleaner itself.
Designed to stand up to “worst case” conditions.
Designed for ease of maintenance, including simple blade replacement and reduced frequency of re-tensioning.
To provide effective cleaning, Martin Engineering is the pioneer of the Multiple Cleaner System, consisting of
Pre-Cleaner
Installed on the face of the head pulley below the discharge trajectory, this cleaner uses low pressure to remove approximately 75 to 90 percent of the residual material.
Secondary Cleaner(s)
Installed at the point where the belt leaves the head (discharge) pulley, or further along the return where space permits, these systems remove the remaining material. Additional (tertiary) cleaners are installed as required by conditions.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End-users (and other cleaner manufacturers) have accepted it almost universally.
• Transfer Points
By preventing spillage and airborne dust, Martin Engineering`s Transfer Point technologies will reduce belt conveyor equipment damage, reduce cleanup, control maintenance expenses, and improve the safety of personnel. But Martin Engineering is more than an equipment supplier. We have created and implemented a comprehensive approach to improving belt conveyor transfer point performance.
• Air Cannons
BIG BLASTER® Air Cannons have been used around the world to prevent buildups and improve material flow. Martin Engineering is the leader in the application of air cannon technology to over come bottlenecks and boost flow through high capacity vessels.
• Engineered Vibration
Using the power of applied vibration, MARTIN® Engineered Vibration Technologies energize material, reducing friction against container walls as well as internal particle-to-particle cohesion. The material moves more freely, feeds more effectively, sorts more consistently, compacts more efficiently, and handles more easily.
The product line of MARTIN® Engineered Vibration Technology includes:
Rotary Air Vibrators - VIBROLATOR® Pneumatic Ball Vibrator, VIBROLLER® Pneumatic Roller Vibrator, VIBROTOR® High-Frequency Pneumatic Vibrator and MARTIN® WHIRLWIND™ High-Frequency Turbine Vibrator.
Linear Air Vibrators - MARTIN® P-Series Piston Vibrator, MARTIN® PV Piston Vibrator and THUMPER® Timed Impactor.
Special Application Vibrators - MARTIN® DC Truck Vibrator and MOTOMAGNETIC® 12-/24-Volt DC Vibrator.
Motor-Driven Vibrators - BRUTE® family of vibrators.
Electric Vibrators - MOTOMAGNETIC® family of Electric Vibrators and Replacement Motors for Retrofit Applications.
Screen Vibrators - MARTIN® Screen Vibrator.
Vibration System Accessories - MARTIN® Mounts, Brackets, and miscellaneous vibrator accessories.
• Railcar Unloading
Improve the safety and effieiency of the unloading of bottom-dump railroad hopper cars.
Unloading bulk solids from railcars is often a difficult `dirty` job. It can be slow, fitful, labor-intensive, inefficient, messy, noisy, and unsafe.
MARTIN® Railcar Systems Improve Unloading Efficiency
The three components of the MARTIN® Railcar System will improve your unloading process.
• BOOT-LIFT® Railcar Connector
Connect car to under-track system quickly and easily.
• MARTIN® Walk Behind Railcar Openers and M90 GATE JACK™ Railcar Opener
Open hopper car gates simply, without crawling under the car.
• MARTIN® Railcar Vibrators
Boost the rate of material flow out of cars or load to full capacity.
• Dust Management
MARTIN® Dust Management Systems solve the problem of airborne dust by keeping fine particles in the load or by returning them to the main material body.
MARTIN® Dust Management Technologies include systems and components for dust collection and dust suppression.
Martin Engineering will take `single source` responsibility for your dust control systems. From system design, hardware manufacturing, system installation, operator training, consumable chemicals supply, and system maintenance, Martin Engineering provides the `Total Solution` to dust management.
• Air-Supported Conveyors
Simple in design and economical in operation, Martin Engineering’s S-Class™ Air-Supported Conveyor System solves the problems of conventional belt conveying. By supporting the belt on a film of air, MARTIN® S-Class™ Conveyors reduce friction and improve operating performance.
To request more information or to obtain pricing using our on-line MARTIN® S-Class™ Air-Supported Conveyor Application Data Sheet, click here. Or you may click on the MARTIN® S-Class™ Air-Supported Conveyor Application Data Sheet link below, print the form, fill it out, then fax it to us to receive a proposal.
Reduced Energy Expense
Low friction system can reduce conveyor power consumption by 30%. You pay less for energy, and conveyor may need a smaller drive.
Longer Belt Life
Low friction material transportation system means less wear on belt; true tracking system prevents edge damage.
Improved Dust Control
Stabile belt path reduces spillage; enclosed system controls dust emission.
Suitable for New or Existing Conveyors
Modular System is suitable for new conveyor, or retrofit projects, and even allows partial installations.
Additional Information:
**********
http://www.google.de/search?num=100&hl=de&client=safari&rls=en&q=Martin+engineering+site%3Abulk-online.com&btnG=Suche&aq=f&aqi=&aql=&oq=
http://www.google.de/search?q=Martin+engineering+site:bulk-online.com&hl=de&safe=active&client=safari&rls=en&prmd=ivns&source=lnms&tbm=isch
**********
Keywords:
Environmental Control Equipment, Dust Collectors, Dust Suppression, Mechanical Conveyors, Air Supported Conveyor, Belt Conveyors, Parts & Components, Belt Cleaners & Scrapers, Idlers Pulleys Rollers, Self-Aligning Idlers, Impact Tables, Repair of Belt Conveyor Installations, Rubber Seals, Skirt Boards, Slider Beds, Transfer Chutes, Vibrators, Silo Storage Equipment & Systems, Silo Discharge Equipment, Air Blasters, Air Cannons, Discharge Aids, External Vibrators, Silo Services, Silo Cleanout Services
|
| Countries of activity:
Europe
All Countries / States
North America
All Countries / States
South America
All Countries / States
Asia
All Countries / States
Australasia
All Countries / States
Africa
All Countries / States
|
